Good morning!!!!

[mpham]

Thanks Scott and others. Will have to have a center for the pilot bit. Maybe wedge a piece of wood into the irregular shaped hole and hole saw it big enough to cover the hole and then use a 1/8 inch over to make the plug
Good suggestion

If you drill the desired hole into a 6x6 [or close] piece of 5/8 plywood you can attach that to the spot needing the plug and center it where desired. You can also take that board and clamp it to the donor board and drill straight thru without the centering bit. I did this to my house when I moved the outside faucet. Hope I explained it correctly!
50 here going to high 60's. Should be a nice day. Off to breakfast with the neighbor in a few hours.
Hope everyone stays safe and healthy!

 

[Thomas]

Hellooo Ms. October 51F partly cloudy day upper 60's for high.

Outside chores done E muffin time.
Plans for today...8 hours at part store after that

Enjoy your day all.

 

[m7040]

If you drill the desired hole into a 6x6 [or close] piece of 5/8 plywood you can attach that to the spot needing the plug and center it where desired. You can also take that board and clamp it to the donor board and drill straight thru without the centering bit. I did this to my house when I moved the outside faucet. Hope I explained it correctly!
50 here going to high 60's. Should be a nice day. Off to breakfast with the neighbor in a few hours.
Hope everyone stays safe and healthy!

Great idea, follow you on how to do it. I have a few other places where plugs are needed and will use it there as well. A 200 year old house always has some challenges and finding workers that can help is like impossible

 

[daugen]

good morning all
56 in Edgewood NM going up to 72 today
I am off at 9am first to visit the Indian Museum in Santa Fe and then continuing North into Colorado to Alamosa. I see it was 37 last night there, brrr.
first lots of coffee.

 

[Buppies]

61 this morning high in 70s more showers today nothing like last night raining over one inch per hour wild not sure of damage daylight coming. Wife had terrible day very angry.

Prayers for all our Country

 

[daugen]

Buppies, just remember, it's not you, that lovely lady still loves you
just having a hard time expressing it
peace be with you

 

[Hay Dude]

Loading bales on the 10th cloudy drizzly day in a row....
Thinking & praying for my brothers & sisters in the path of Helene

 

[buckeyefarmer]

If you drill the desired hole into a 6x6 [or close] piece of 5/8 plywood you can attach that to the spot needing the plug and center it where desired. You can also take that board and clamp it to the donor board and drill straight thru without the centering bit. I did this to my house when I moved the outside faucet. Hope I explained it correctly!
50 here going to high 60's. Should be a nice day. Off to breakfast with the neighbor in a few hours.
Hope everyone stays safe and healthy!

That would be my suggestion also.

 

[buckeyefarmer]

Did I post this one yet?

 

[buckeyefarmer]

Waterfall way back there