Good morning!!!!

   / Good morning!!!! #194,452  
Good (Sunday) morning. Overnight Low of 4.1C and it's presently 9.2C, partly cloudy with a gentle breeze.

As per usual, I'm off to Church in about a half hour and then the rest of the day is His.

That's about it, take care all.
Need to pick up a few cattle panels at TSC for a project
This reminded me about something I read on Facebook... and, somewhat related to, the Olympics.

I learnt that "hurdles" were originally pre-fabricated fencing panels, made of woven branches in a fairly standardised length/hight. Made, of course, by 'hurdlers'.
 
   / Good morning!!!! #194,453  
The splined collar is off using bigger tools. Looks like at the end of the shaft the splines was a little deformed and that was hanging it up. But all off and cleaning up the aluminum housing that was on the underside of the mower deck. I may as well change the bearing in the housing and the two shaft seals as well before putting it back together.

Popg, thanks that would have been next step. I don't think I will rebuild it because the gears and parts are expensive and this repair will likely last longer than the mower anyway. But had to either cut trough the aluminum housing on the underside or cut through the cast iron gearbox to get at it

It gave me a good test run raising and lowering the front of the mower using the Milwaukee drill all quick and effortless.

IMG_3741.JPG
IMG_3740.JPG
 
   / Good morning!!!! #194,457  
Every year we have a coast guard festival in grand haven mi. We usually go through the week but not this year. Too many people and road construction.

Tonight did go cuz it was the fireworks. They had drones out along with the Pyro.

I'm amazed with what they can do with the drones.
32602.jpg

32610.jpg

32620.jpg

32618.jpg
 
   / Good morning!!!! #194,458  
Poured first cup of coffee. 61° with clear skies this morning. Heading to 87° with some clouds in afternoon. Got Kubota mower greased and lube levels checked yesterday. Got warm very early in the morning. Will do JD mower today. Hope to spread some weed killer along fence line before it gets to hot.
XdjR40j.jpg


Prayers and best wishes for everyone.

Good Morning All.
 

Tractor & Equipment Auctions

2015 Ford F150 Crew Cab Pickup (A50323)
2015 Ford F150...
2012 MACK GU713 DUMP TRUCK (A50459)
2012 MACK GU713...
2018 Volkswagen Jetta Sedan (A50324)
2018 Volkswagen...
Truck Tool Box (A50774)
Truck Tool Box...
New Kivel Single Skidloader Spear (A50774)
New Kivel Single...
2013 Ford Explorer AWD SUV (A50324)
2013 Ford Explorer...
 
Top