buckeyefarmer
Epic Contributor
We have snow in the forecast for next Wednesday.
Good morning!!!!
- Thread starter 300UGUY
- Start date
- Views: 17185233
scott_vt
Super Member
- Joined
- Oct 5, 2004
- Messages
- 7,351
- Location
- east wells,vt
- Tractor
- 1986 MF 1040, 1942 Farmall A, 1949 Farmall Super A
Good Afternoon gstrom99,
Beautiful lift, I can’t tell you how many times that I wished I had one !
Is that a 12 ft ceiling in your shop ?
I’m thinking you need that height for the lift to be effective !Enjoy it !
Beautiful lift, I can’t tell you how many times that I wished I had one !
Is that a 12 ft ceiling in your shop ?
I’m thinking you need that height for the lift to be effective !Enjoy it !
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,194
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
What snow say it ain’t so. Look for November to turn mild after next week thru first of December. Thomas not so much
scott_vt
Super Member
- Joined
- Oct 5, 2004
- Messages
- 7,351
- Location
- east wells,vt
- Tractor
- 1986 MF 1040, 1942 Farmall A, 1949 Farmall Super A
txdon
Super Star Member
On the first PT, the day after surgery, Wednesday, I got to 103˚ knee bend. Second PT, today, I got to 108˚ knee bend. I did not loose any flexion during the peak swelling - 72 hours after surgery.
The "easy" at home PT has only 4 more sessions, (Only 6 in home allowed by Medicare) then I'm scheduled With The Doctor - Lopez, DPT that's when knee bending gets very serious and improvement each session is mandatory. THE BEND will have to be reach 130˚ and perfectly straight the other direction. The Doctor will also make sure my gait is young again.
A lot of hard work ahead.
The "easy" at home PT has only 4 more sessions, (Only 6 in home allowed by Medicare) then I'm scheduled With The Doctor - Lopez, DPT that's when knee bending gets very serious and improvement each session is mandatory. THE BEND will have to be reach 130˚ and perfectly straight the other direction. The Doctor will also make sure my gait is young again.
A lot of hard work ahead.
Last edited:
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,049
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Kittens going to stretch nap in front of pellets stove.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,049
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Ahhhh what you mean?
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,049
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Balmy 66F partly cloudy sky.
4 hours at was blur than quick lunch,little over 3 hours bouncing rider mower hope for the last time this year.
Mrs. wanted to try new Chinese restaurant for date night,have to admit it was darn good Chinese low on my favor totem pole when comes to eats.
Mrs. enjoy her dinner very very much enough so she had another helping ...she 5' 9" 119lbs...I think she has pregnant tape worm.
Plans for the evening...Nope Nothing BIG O.
Enjoy your evening all.
4 hours at was blur than quick lunch,little over 3 hours bouncing rider mower hope for the last time this year.
Mrs. wanted to try new Chinese restaurant for date night,have to admit it was darn good
Chinese low on my favor totem pole when comes to eats.Mrs. enjoy her dinner very very much enough so she had another helping
...she 5' 9" 119lbs...I think she has pregnant tape worm. Plans for the evening...Nope Nothing BIG O.
Enjoy your evening all.
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,638
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
Good (Saturday) morning. Overnight Low of 3.9C and it's presently 19.2C, somewhat overcast with a breeze.
Gave myself a haircut yesterday. I've used one of those round bladed head shavers to give me a #2 all over, followed by a beard trim and an ear hair clean out.
Next was to take a 'tour' around the property... sure enough there was a few wattle tree branches to take care of. So much so that I reckon I'll need to take that whole tree down once and for all. It's threatening a fence in Paddock #2 so it's more of a priority.
The fire in the woodheater is being allowed to extinguish. Hopefully that'll be the last one 'til Autumn.
That's about it, take care all.
Gave myself a haircut yesterday. I've used one of those round bladed head shavers to give me a #2 all over, followed by a beard trim and an ear hair clean out.
Next was to take a 'tour' around the property... sure enough there was a few wattle tree branches to take care of. So much so that I reckon I'll need to take that whole tree down once and for all. It's threatening a fence in Paddock #2 so it's more of a priority.
The fire in the woodheater is being allowed to extinguish. Hopefully that'll be the last one 'til Autumn.
That's about it, take care all.
Looking4new
Super Member
- Joined
- Apr 8, 2012
- Messages
- 9,863
- Location
- Northern Ontario, Canada
- Tractor
- 2012 Kioti CK27HST w/cab
I am 8 hrs and 19 minutes from Hornepayne IF I go via highway 11.Looking4new, Bill are you anywhere near Hornepayne in Northern Ontario ? Had a friend up there !
All have a great day !
I would probably take highway 17 and run north at White River.