Good morning!!!!

[Popgadget]

Don’t forget the sears Christmas catalog.

 

[Fuddyduddy1952]

My Dad was Sears service manager so I got a 10% discount. He was always bringing home things people returned broken. He had to pay 50 cents for it. Two I remember were bicycles. A broken frame Dad welded, a girls bike he welded in a top bar so it looked like a boys bike. They were 3 speeds.
For Christmas we could pick anything out of Sears catalog with a $30 limit.

 

[mostly_gas]

Good evening all. 70ºF for the start, mostly clear sky, light breeze. Light wind, partly cloudy sky and high temp was 96ºF, HI 99ºF. Slow start to bike ride, 88ºF by the time it was over, then after lunch, mowed back yard. After nap trip to town to get groceries and dinner. OReilly did not have enough fuse holders for boat charging system.
Dennis Sounds like Turbocad will work for you. Hope the VPN will help with restricting remote logins to legitimate ones.
Scaredy I see why they tool naming privileges from you
Scaredy up late or early?
Roy hope all are getting better.
Drew enjoy your weather. May not see a funeral like that for a while.
Buppies Lugging that load around should build your upper body strength! Hope crew shortage not hurting too much!
Mike nice progress on grass control, good luck with lawsuit.
Frits hope shopping went well, and daughter has safe travel.
Don sorry about heat , same up here. Interesting substitute for corn in the maze.
Billy going to cool over there. No experience with emergency necklace, glad you found the wasp nest.
Ken hope clean is easy.
PJ hope you don't have to spend a lot off time in the weld shop.
Paul Speaker work looks great. Glad you got some GS time. Good to hear wife is coming along.
Buppies sorry about no work, hope you get enough crew back to work again.
RNG sorry to hear about the motorcycle problem. Glad was easy to deal with. Hope you had a safe trip home today.
David glad you made some progress, hope trip went well for supplies. Good luck at H&F.
David sorry about no install available.
Thomas sorry could not use weed whacker. Nice rain
David sorry about furry critters getting in DW area. Good luck stopping them.
Roy good to hear you and your wife feeling better.
Dennis had one of the Sears catalogue store in Rolla in the late 70's.
Ken good luck finding microwave that keeps both of you happy. sorry about boring class.
Dennis hope kitty does not have to wear cone long.
Fuddy welcome to GM thread, I remember going from 1 speed to 3 speed, thought I was in heaven
prayer for all, especially Jay/Peg, Kyle's daughter and family drama, /mom's breathing, /learning new job, /friends upcoming new baby, Bird/aging issues/, Don /mom's pipeline process, Randy / RIP /condolences to Family, Roy /palpitations, /angina, /alligatoritus, /wife ankle, not get sick, Billy /wife back & hip, mom hypertension & congestive heart failure, David(moss) /remodel, /divorce, Buppies /3 new skin cancer spots and treatment, /wife knee healing, Thomas /gout, Phil /reflux, /wife's eyes, Frits/ daughters hip replacement /veteran son with mental issues, Steppenwolfe/son-auto immune disorder, Grev/wife's eye, Ted /knee recovery, /retirement, /family issues, /wife feeling bad, Doug and wife/health issues, /nerve and pain, / wife headaches, David(sadamo)/Sophie's new eye surgery recovery, Chris /neighbor's granddaughter and Covid issues, Scaredy/shoulder dislocation, /wife not feeling well, /marriage, / friend stop drinking, Paul/ wife's healing from back surgery, Gale and KY/ tornado victims, Mike /5 year plan, Dennis /retirement plans and land purchase and development, / brother "alligallyitus" and improving, Drew /foot heel issues, /friend cancer diagnosis and recovery,Mike /spine injury and recovery, Helogabals /second opinion, /wife's friend situation, Ukraine war, and Country.

 

[buckeyefarmer]

Day 2 of turbocad, I did a snapshot from google of the lot and imported it into my lot drawing. Rotated and stretched to line up about with the boundaries. Then I marked the tree lines by tracing on the picture. Then located the septic area based on distances from 2 power poles. Not perfect but within a few feet.

Maybe I should have gotten the version of turbocad that has autocad menu system, I’ve had autocad before. It wasn’t offered in a bundle package, and cost more. . Still quickest to google what I need to do.

The kitten doesn’t act like anything happened, running, jumping and playing. I doubt the cone will be on in the morning, she got it off once.

Found out from realtor, who spoke to county, that I don’t need permit or a bond to put in a driveway, since it comes off an existing private drive. Will just need to call for utility mark before, gotta be a phone line somewhere along the road.
Thinking of going down again Saturday to look more. Almost 4 hrs away though, 225 miles.

PJ, hope car I’m waiting for wasn’t on that train.

 

[scaredychicken]

Roy J and family - stay safe, get well. prayers for quick recoveries

Sears left town and most of BC, about 1o years ago - sad.

Medic Bracelets, Call Assistance - great tools. A friend of mine has her allergies all noted on a very nice (medical style) tattoo on her forearm - I thought that that was brilliant

Mostly - between naps... always been a nighthawk, but current situation here (Sister In Law being 10 ft away at most) means that my down time, privacy, phone calls, office work ... is best done once she's out of the room and in bed ... she has no respect for this being my house, no consideration for my space etc ... it's terrible. my wife needs to get home to help me through this awful arrangement. So short answer is that I was probably still up. I do nothing but bite my tongue lately, I really want to react, but that would solve nothing ... Wife will need to be on board with changes. This can not continue.

I finished a bit more bookkeeping. Been a busy week. Two dump runs also.

The only great thing is that I had a visit with my 7 month old grandson and his parents today - that is always so much fun.

 

[Wagtail]

it's a pretty big place ... are you getting anywhere near BC ?



confirmed, we have internet


poutine is good, lots of micro-breweries also, variety for sure

Burlington, Ontario... visiting family.

 

[RoyJackson]

2022-09-21, 0407

55° right now...high in the low 70's. Rain's done for a couple days now
Wife's feeling a bit better, but has been eating in bed the last couple days
I'm probably at 50%...but seems to be improving...maybe not, I'm feeling achy and chest congestion again. What I read an hour ago was covid relapse isn't uncommon...25%-30% of the cases can relapse. That sucks...last week was bad enough. Well, if I am relapsing, I just hope it's not as bad as the first time...

 

[mpham]

Morning all! Looks like a postcard day for the weather. Starting at 57 this morning going to a sunny 71 with light to no wind!
Found the cause to my joint pain. One in a million people actually can get worse joint pain from Glucosamine. I stopped taking them and was back to regular arthritis pain in 3 days. Figures I would try something to get better and make it worse. Lol!
Concert was fun and we all had a good time.
Garden is all ripped out and cleaned except for the tomato plants. Cold weather coming towards the end of the week so we will see how long they last.
Not much planned for today. Going to get the wife's car washed and a sister's car too if she stops to visit.
Hope everyone stays safe and healthy!

 

[wngsprd]

58 going to 87.

Sears...great memories of their stores, and catalogs...my grandfather would give me his catalog and let me choose one gift for Christmas. As an adult, their store was one of the few I enjoyed when we would take the kids shopping at the mall...spent a lot of time in the tool and lawn/garden sections.

Did some touch up painting yesterday on areas I had done some caulking.

 

[daugen]

good morning all
should be a nice warm day up to 86 today, maybe warmer.

lot of interesting posts
At least three of my homes got new appliances from Sears. Guy who worked there wore a suit and tie every day, older gentleman who knew his stuff,
and it was all a pleasure. Now thankfully there is a good local appliance store near me, over in Stockton NJ. I know the owner so if something conks out, I know I won't wait
a week for a repair.

Wngsprd's memory of the tool and mower areas are same as mine, all good. Walking down those aisles with all those shiny Craftsman tools hanging up, back when most if not all were made in this country. No Harbor Freight then, this was the most tools in one area locally. I equipped an entire wood shop forty years ago with Craftsman power tools. If you couldn't afford Delta,etc, that's where we went.

been chatting with a guy who is coming next Monday to lay down modified 3/4 on my driveway; he promised with good rolling they could really pack it down and it would pack better than just
putting shavings on top. And then he proceeded to tell me he had to recently pull his daughter out of the Quaker private school I'm on the board of, and oh my, that got interesting. Had to carefully wear my school board hat, knew nothing about it, purview of Admin, not school board. But I had to email head of school and let him know what the guy said. Apparently two kids who couldn't get along.

Told my landlady she was getting a 1700 dollar driveway for Christmas. She replied that it wasn't every day a girl got a driveway for Christmas. I couldn't ask her to do this, the driveway was fine except for wrecking my snowblower. But the paint job in my basement is now fully on her. Good give and take relationship. My rent is pretty low for the area, have a good deal here, and want to stay, so very willing to make investment in relationship. she has brought both her sons over to check out how nice I've made this place. I casually mentioned to her son, who will inherit all her rental properties, I was going to make this property be worth a lot more when I left. He smiled and nodded.

been using hot tub every day. Even using bromine, I still smell a little getting out of it, if headed out to work I don't care but otherwise take a shower. Hot water wonderful on my arthritis.

got the leaf bagger installed on the mower without a problem, other than gashing my hand on one sharp edge. Bagger does a great job, looks like a commercial where a vacuum went up and down the lawn, leaving not one leaf left. Helps to wait until they are fairly dry. I've had tracvacs in the past, more storage is great, but geez do they get heavy when emptying. These double bags when full are plenty heavy for me.

have a great day guys.