rswyan
Super Star Member
- Joined
- May 12, 2004
- Messages
- 11,415
- Location
- Northeast Ohio
- Tractor
- Kubota B2910, Cub Cadet Pro Z 154S, Simplicity 18 CFC, Cub Cadet 782
Happy Birthday David !
That's a LOT of daffodils, RS!
The company that picks up trash here doesn't provide a separate recycle bin, and doesn't have drop off recycling either, Drew. And Waste Management in town shut down their collection site, as did the one helping developmentally disabled people. Truth be told, I've read that it actually costs more to recycle glass than make it from raw materials, so in reality, recycling it is just another tree hugger feel good thing.
Double checked all the measurements on the transmission yesterday, cleaned everything up again and reassembled, and it still turns with what feels like too much resistance. Put it in the oven at 250F for a few hours, and when hot, everything feels like it should. And now that it's cool, it freed up some but it's still a little stiff. The handbook I'm using suggested using grease between the shims to hold them in place, but it very well could be that the stuff I used is too thick and is taking up too much room. If that's the case, it'll eventually squish out and the resistance will go down. I'm tempted use it like it is, but it's very likely I'll take it apart one more time and adjust the shimming on the input shaft to give it just a few more ten thousandths of an inch more clearance. And use oil instead of grease to hold the shims in place. Hard to believe that that small of an amount could make such a difference, but it apparently does. The specified tolerance range is 0.002" - 0.004". Live and learn.
Hope you have a great one.67°F and no rain
Today marks my 75th trip around the sun Bo, whodda thought? I remember back when thinking 75 was really old!
Today’s focus will be TDay prep. 18 fully vaccinated friends will be here tomorrow for a potluck dinner. I’m responsible for the ham and turkey.
Prayers for all
Be safe
Have a great day
Copernicus figured out heliocentrism 500 years ago!One of you two needs to brush up on their astronomy...![]()
I'm not so sure about some of these guys......we're all on planet Earth...