Good morning!!!!

[Rich B1]

Good afternoon! 35 and snowing. First one this year.



Louie the Maine Coon cat is enjoying the snow. He is going from window to window to watch it fall.

First weekend we have used the wood burner this year. Late start for us, but it has been too warm.

We went shopping this morning, then we were gonna work on a log pile to turn big logs into small logs for the wood splitter. The snow put a halt on those plans.

did some clean up in the garage yesterday. Ran some more parts thru the ultrasonic cleaner. I should have gotten one of these years ago. I am impressed. Then started putting a Bultaco engine together.

Today is likely gonna be a repeat of yesterday.

Everyone stay safe out there!

 

[rswyan]

33F and light snow @ 14:30, heading up to 37F or so for the high. We've had over an inch of snow so far, judging by what's on the rail of the back deck.

Lots of activity out around the feeders:

Soil temp is currently 41F and calling for a high of 41F tomorrow, so it will likely be all gone within 24 hours.

Calling for a high 62F by Wednesday before we head back down to highs in the 40's. Cold, wet Fall is officially here.

Up late today after doing another binge watch of The Expanse last night, think I'm up to Season 3 at this point.

Good progress made on kitchen clean up yesterday, got all the dishes done and put away, plus other clean up as well. Will continue with more clean up in the kitchen today.

The Bodum carafe that we make coffee with broke the other day, Woman suggested I order another one. Think I'll pull the Krups Coffee/Expresso out of the hall closet and set that up instead, assuming it doesn't leak.

Been considering how to approach the repairs on the Kubota and had been toying with the idea of doing it down here at the house in the garage, since it would be easier to clean it out and make some space. Don't think I'll do that though, since most all of the tools and equipment is up in the shop.

So tomorrow I will likely begin the process of cleaning up the shop and making room up there so I can get it in to work on it.

Hope everyone has an enjoyable, productive, and safe Sunday ...

 

[daugen]

that's a lot more snow than I want to see any time soon...
cold and blustery here, sucked up leaves for an hour, beat the blades up a lot on little twigs and tree stuff blown out by yesterday's
high winds. Normally I'd go pick them up but I have to sharpen these blades when I'm all done the leaves anyway. Power bagger works very well, these
were slightly wet leaves.

 

[RoyJackson]

Ran some more parts thru the ultrasonic cleaner. I should have gotten one of these years ago. I am impressed. Then started putting a Bultaco engine together.

What kind did you get, and from where, if I may ask?

 

[Rich B1]

It is a Rovsun brand. Most seem made in China, so read a lot of reviews on different brands and chose this one.

15L tank capacity, mechanical dials for temperature and time control. A lot of reviews for other brands mentioned failures of the digital controls. So mechanical controls seemed prudent.

Depending on what you want to clean, you may be able to get buy with a smaller unit. Or larger!

 

[RoyJackson]

It is a Rovsun brand. Most seem made in China, so read a lot of reviews on different brands and chose this one.

15L tank capacity, mechanical dials for temperature and time control. A lot of reviews for other brands mentioned failures of the digital controls. So mechanical controls seemed prudent.

Depending on what you want to clean, you may be able to get buy with a smaller unit. Or larger!

Thank you!

 

[buckeyefarmer]

43°

Church seminar done, was a very good series of lessons

Did get a few of the back yard leaves mowed this afternoon, but when I tried the front yard, the wind just blew them back on me.

 

[mostly_gas]

good evening all. 42F for the start, mostly clear sky, near calm wind, no dew. Wind light to moderate, sky stayed mostly clear, and high temp was 68F and DP 33F. Chapel to start day, the make wife pancakes, then into energy conservation mode. Did get nap in.
Covid update: Cooke 4199 confirmed cases, 11 active cases, Montague 2678 confirmed cases, 19 active cases, Grayson, 16,371 confirmed cases, 65 active cases. Cooke 3, Montague 3, Grayson 0, new cases. Grayson number still don't add up, but getting closer
Ron nice freezer find. nice pic
Dennis wonder what will pop up after I watched the Simpsons
Buppies hope you don't join the ranks
Drew have fun with Christmas lights
Bill enjoy your day
Roy glad you getting something out the wife assist time
Thomas hope you recover today
Randy you you tried earplugs?
Paul glad you get to go to the wedding instead the flight you don't want to do. Neat pic
Rich enjoy your snow, Have fun with the Bultaco engine
RS nice snow pic. Good luck with tractor work.
prayer for all, especially Jay/Peg, Kyle's daughter/friend PT from Covid, Bird/aging issues/, Don,whipper/more tests,ring bearer/back broken & infections, Randy/FIL living alone adjustments /MIL covid, /cancer surgeries, PJ/FIL fall and stroke, Dennis /wife wrist surgery and recovery, Roy/ palpitations/ angina, wife/ankle recovery, David(moss)/remodel/divorce, Buppies/new cancer on arm /lingering cough, Thomas/gout, Phil/reflux/wife's eyes, Steppenwolfe/son-auto immune disorder, Grev/wife's eye, Ted/knee recovery/retirement, Doug and wife/health issues/nerve and pain/ wife's eyes, Ken/aunt fall injuries, David(sadamo)/Sophie's new eye surgery, Chris/neighbor's granddaughter and Covid issues, RS wife/ dog bite recovery, Scaredy/injuries from fall, Paul/ wife's disc issues, Mike/elbow pain, and Country.
stay safe and healthy you all

 

[txdon]

I have been unsuccessful in getting a scan sent to e-mail on my hp 5660 printer. I just get an error message saying "there was a problem connecting to the server". The wifi is connected. I have got out and reconnected with the wi fi password but still it has the same error message. Has anyone run into this problem and figured it out?

 

[B7510HSD]

I have been unsuccessful in getting a scan sent to e-mail on my hp 5660 printer. I just get an error message saying "there was a problem connecting to the server". The wifi is connected. I have got out and reconnected with the wi fi password but still it has the same error message. Has anyone run into this problem and figured it out?

Do you have the Scanner software open and running on the PC you are sending it too?

 

[txdon]

Do you have the Scanner software open and running on the PC you are sending it too?

Yes and same error message. It used to work and when you hit the scan icon on the printer it gives you three options to scan to 1. computer, 2. memory device and 3. email. When I hit email it would come up with my email address but now just the error message.

 

[sodamo]

Good evening from Mesa, Az. Behind on reading GM, will have to get caught up.
Most of the plans in place for Wed and people start arriving tomorrow. BIL was so active in his community they are expecting in excess of 100 for his Celebration of Life.
One thing I have learned so far is how insanely expensive it can be to die. Already told Sophie if she spends anywhere near that on me, I’ll haunt her forever. Cremate, scatter my ashes in the pet cemetery (amongst those that loved me), and have a pot luck gathering.

 

[RoyJackson]

2021-11-15, 0301

36° right now...high in the low 40's today...

 

[ronjhall]

Poured first cup of coffee. 29° with a few clouds. Heading to 40° with some flurries and sun. Got the laundry done yesterday. Then a nap after I changed sheets on bed to flannel. Today I have to put laundry away.
Taking a walk in the sno*.

David, it was expensive 2 years ago when my wife passed. We had put money away for both of us. Her funeral used some of my share. Not to worry. Mine will not be that much. Put my ashes in a coffee can and bury me in the same plot she is in.

Don, Have you tried using HP's diagnostic site to fix your problem. It worked with my PC. For some reason my Device Connect was shut down. The software fixed it.

Drew, no problem with leaves here. Snow cover them up.

Popgadget, neat photo.

Everyone stay safe and healthy.

Good Morning All.

 

[Buppies]

34 feels like 24 very windy close ton70 Wednesday 41 Thursday

Prayers for all

 

[Bird]

39 degrees going for a sunny 77 today. And I'm about to spend my morning, first running the vacuum cleaner through the house, and then running the Hoover Steam Vac to clean all the carpets. They don't "LOOK" dirty now, but I suspect the steam vac will load up with dirty water anyway.

 

[Looking4new]

Good morning, low temp 25 and going to a high of 36°F. Wind N 7 mph. 30% chance of flurries. Wind chill/feels like 18F.

Neighbour lady has the trailer almost full, I will go to the dump with it tomorrow (dump closed on Mondays).

A town run is in the cards for today, then I don't know what I will get up to.


Have a safe day all

 

[Eric Salop]

Have been making the most of the dry weather, was nice to be able to take the Iseki into fields without making too much mess of the gateways. Finally got on with digging in a replacement gate post that has been cluttering up my mental to-do list for way too long.

I have been unsuccessful in getting a scan sent to e-mail on my hp 5660 printer

Don, both my wife's and my PC stopped printing this week, I suspect it was a windows 10 update issue. I ran the HP diagnostic tool that Ron mentioned and that sorted it for both of us.

 

[B7510HSD]

Don I think I would uninstall the Printer software and do a fresh install

 

[daugen]

good morning all
on the run, dentist appt first thing, will see how painful that is literally and financially...
Then food run, going to do a little stocking up of basics now that I have more storage shelving in kitchen
and basement.
grey sky, light rain showers predicted, might see my first white flakes out there this morning.

hope you all have a great Monday. David, enjoy your family, don't catch a disease...