Good morning!!!!

[Rich B1]

Good afternoon! 35 and snowing. First one this year.



Louie the Maine Coon cat is enjoying the snow. He is going from window to window to watch it fall.

First weekend we have used the wood burner this year. Late start for us, but it has been too warm.

We went shopping this morning, then we were gonna work on a log pile to turn big logs into small logs for the wood splitter. The snow put a halt on those plans.

did some clean up in the garage yesterday. Ran some more parts thru the ultrasonic cleaner. I should have gotten one of these years ago. I am impressed. Then started putting a Bultaco engine together.

Today is likely gonna be a repeat of yesterday.

Everyone stay safe out there!

 

[rswyan]

33F and light snow @ 14:30, heading up to 37F or so for the high. We've had over an inch of snow so far, judging by what's on the rail of the back deck.

Lots of activity out around the feeders:

Soil temp is currently 41F and calling for a high of 41F tomorrow, so it will likely be all gone within 24 hours.

Calling for a high 62F by Wednesday before we head back down to highs in the 40's. Cold, wet Fall is officially here.

Up late today after doing another binge watch of The Expanse last night, think I'm up to Season 3 at this point.

Good progress made on kitchen clean up yesterday, got all the dishes done and put away, plus other clean up as well. Will continue with more clean up in the kitchen today.

The Bodum carafe that we make coffee with broke the other day, Woman suggested I order another one. Think I'll pull the Krups Coffee/Expresso out of the hall closet and set that up instead, assuming it doesn't leak.

Been considering how to approach the repairs on the Kubota and had been toying with the idea of doing it down here at the house in the garage, since it would be easier to clean it out and make some space. Don't think I'll do that though, since most all of the tools and equipment is up in the shop.

So tomorrow I will likely begin the process of cleaning up the shop and making room up there so I can get it in to work on it.

Hope everyone has an enjoyable, productive, and safe Sunday ...

 

[daugen]

that's a lot more snow than I want to see any time soon...
cold and blustery here, sucked up leaves for an hour, beat the blades up a lot on little twigs and tree stuff blown out by yesterday's
high winds. Normally I'd go pick them up but I have to sharpen these blades when I'm all done the leaves anyway. Power bagger works very well, these
were slightly wet leaves.

 

[RoyJackson]

Ran some more parts thru the ultrasonic cleaner. I should have gotten one of these years ago. I am impressed. Then started putting a Bultaco engine together.

What kind did you get, and from where, if I may ask?

 

[Rich B1]

It is a Rovsun brand. Most seem made in China, so read a lot of reviews on different brands and chose this one.

15L tank capacity, mechanical dials for temperature and time control. A lot of reviews for other brands mentioned failures of the digital controls. So mechanical controls seemed prudent.

Depending on what you want to clean, you may be able to get buy with a smaller unit. Or larger!

 

[RoyJackson]

It is a Rovsun brand. Most seem made in China, so read a lot of reviews on different brands and chose this one.

15L tank capacity, mechanical dials for temperature and time control. A lot of reviews for other brands mentioned failures of the digital controls. So mechanical controls seemed prudent.

Depending on what you want to clean, you may be able to get buy with a smaller unit. Or larger!

Thank you!

 

[buckeyefarmer]

43°

Church seminar done, was a very good series of lessons

Did get a few of the back yard leaves mowed this afternoon, but when I tried the front yard, the wind just blew them back on me.

 

[mostly_gas]

good evening all. 42F for the start, mostly clear sky, near calm wind, no dew. Wind light to moderate, sky stayed mostly clear, and high temp was 68F and DP 33F. Chapel to start day, the make wife pancakes, then into energy conservation mode. Did get nap in.
Covid update: Cooke 4199 confirmed cases, 11 active cases, Montague 2678 confirmed cases, 19 active cases, Grayson, 16,371 confirmed cases, 65 active cases. Cooke 3, Montague 3, Grayson 0, new cases. Grayson number still don't add up, but getting closer
Ron nice freezer find. nice pic
Dennis wonder what will pop up after I watched the Simpsons
Buppies hope you don't join the ranks
Drew have fun with Christmas lights
Bill enjoy your day
Roy glad you getting something out the wife assist time
Thomas hope you recover today
Randy you you tried earplugs?
Paul glad you get to go to the wedding instead the flight you don't want to do. Neat pic
Rich enjoy your snow, Have fun with the Bultaco engine
RS nice snow pic. Good luck with tractor work.
prayer for all, especially Jay/Peg, Kyle's daughter/friend PT from Covid, Bird/aging issues/, Don,whipper/more tests,ring bearer/back broken & infections, Randy/FIL living alone adjustments /MIL covid, /cancer surgeries, PJ/FIL fall and stroke, Dennis /wife wrist surgery and recovery, Roy/ palpitations/ angina, wife/ankle recovery, David(moss)/remodel/divorce, Buppies/new cancer on arm /lingering cough, Thomas/gout, Phil/reflux/wife's eyes, Steppenwolfe/son-auto immune disorder, Grev/wife's eye, Ted/knee recovery/retirement, Doug and wife/health issues/nerve and pain/ wife's eyes, Ken/aunt fall injuries, David(sadamo)/Sophie's new eye surgery, Chris/neighbor's granddaughter and Covid issues, RS wife/ dog bite recovery, Scaredy/injuries from fall, Paul/ wife's disc issues, Mike/elbow pain, and Country.
stay safe and healthy you all

 

[txdon]

I have been unsuccessful in getting a scan sent to e-mail on my hp 5660 printer. I just get an error message saying "there was a problem connecting to the server". The wifi is connected. I have got out and reconnected with the wi fi password but still it has the same error message. Has anyone run into this problem and figured it out?

 

[B7510HSD]

I have been unsuccessful in getting a scan sent to e-mail on my hp 5660 printer. I just get an error message saying "there was a problem connecting to the server". The wifi is connected. I have got out and reconnected with the wi fi password but still it has the same error message. Has anyone run into this problem and figured it out?

Do you have the Scanner software open and running on the PC you are sending it too?