Good morning!!!!

   / Good morning!!!! #121,061  
Kyle,

That looks like an interesting unit (I like it ... :thumbsup:) ... hope you can get it operational without too much time or expense.
 
   / Good morning!!!! #121,062  
47F and rain @ 21:30.

Got the 3 sunflower seed feeders refilled, about half the fish tanks fed, and about 1/2 the water for pwc's moved into the fish room.

Dishes put away and some kitchen cleanup done.

All the rest of the boards for the squirrel feeders cut, including angles and slots for drip edges and the clear plastic windows on the the front. Even managed to sneak outside during the brief lull in the rain to un-tarp and use the radial arm saw. Only thing I lack is a set of hinges for the lid ... and those were on the Menards order I placed today. Have some more cracks in a few pieces that I need to run a little Titebond III in, which I'll do here in a little bit ... along with coating the outside of the boards with BLO.

Amazon delivered pump for parts washer ... :thumbsup:

TSC and Menards orders placed and they are ready to be picked up tomorrow.

Hope everyone had a great day.
 
   / Good morning!!!! #121,063  
Would love to see a pic if you get the chance.

It arrived intact. Needs some setup work to make it more playable, but it sounds good. I am pleased with it.

Gibson LP Custom White 9.JPG
 
   / Good morning!!!! #121,064  
Heard rain in the night, and Rain all day. Looks like about over. Close to 1.5” in gauge.

I ordered an ambient weather station and it comes tomorrow.

When I got home last night, wife said water was leaking under the main bath sink, soaked everything in bottom of cabinet. But when I looked, the water lines and drains were dry and no obvious leak.
Today she txted me that water was on floor again and bottom of cabinet soaked.
I left work early, and there was another large pool of water in front of vanity.
Took the two drawers out , turned on water and could see water spraying from the underside of faucet. Of course, one shutoff would not shut off, so turned off water to house. Removed faucet, replaced bad shutoff with a new quarter turn valve I happened to have, then could turn house water on. Hooked faucet back up, with faucet sitting in the sink bowl, and saw that water was leaking out of the bottom of the faucet valve. This was a rather new delta faucet.
Went to Lowe’s and got new faucet and a few more quarter turn valves to replace some others. All my original water valves are the old screw shut globe type style, and most don’t work. Going to turn house water off again and replace some more.
Also bought a 3/4” ball valve to install as the house shut off. It’s a globe type valve and starts leaking around the stem when it’s used.

Just sat down to relax, and they started smelling something like it was overheating. Think it’s the satellite tv receiver, it was very warm so unplugged it.
 
   / Good morning!!!! #121,066  
Good evening all. 41F for the start, overcast, light breeze, and trace in gauge. Overcast till mi afternoon, windy, and high temp 60F. Clean and lube chain on Volagi, stoke fire, and bike ride in afternoon, 37 miles instead of the usual 20.5. Need to get gravel tires back on Trek. Did sneak nap in before bike ride.
Covid update: Cooke 566 confirmed cases, 34 active cases, Montague 290 confirmed cases, 33 active cases, Grayson 2661 confirmed cases, 220 active cases.
David nice progress on caretaker project
Roy sorry about the tire, glad it was no worse. Nice snow machine !
Phil good tohear garage is clean, hope knee cooperates
Drew glad you don't have to go anywhere with the bad weather, sorry about no vacuum.
Billy sorry about body complaining, what is special about chemex filter?
Mike sorry about MRI delay agree grinding won't go away in body joints. Hope the rest of the dirt work is in smaller doeses.
Ron impressive collection of turkeys. hope the leaf pick up goes well
Eric that is a small hook. I catch 2-4 inch bluegill on popping bugs that the fish can't get in it's mouth!
Randy no how could a dog ever get spoiled? why shouldn't Ellen keep more cats, she keeps you doesn't she?
Bird congrats on being the oldest ever, sorry about the falling
Drew sorry about losing the pictures,
Frank enjoy your conserve energy day.
Chris sorry about the hand raking
Ken unless you have a lot of inside work, hard to get much done
RNG sounds like you are going to come out ok if new valves don't leak. Good news on new panels, hope you can get punch list done. Enjoy camping trip
Don sorry to hear about cousin's new restrictions, good luck tracking down drip.
PJ understand about wanting weather closer to average. We were 30-35F colder than average Monday through Wednesday. Enjoy your new guitar
Buppies lot of water and wind.
Ted hope the snow melts and waters your ground.
Drew good news on the boxes. hope they have the pics you want
David good luck with project
RS sorry about catch basin, hope your weather holds long enough to get outside winterized
Don Nice pic
RS nice pic
Randy nice pic
Thomas glad outside work got done
Bill glad Timmons trip went well and you have your Jeep.
Rich nice pic
Kyle hope most of problem is hydraulic steering, bet you can get it going
RS good progress
PJ Hope to too much setup work.
Dennis I hate plumbing work.
prayers for all, especially Jay/Peg, Kyle's daughter, RNG/fire, and Country/election
stay safe and healthy you all.
 
   / Good morning!!!! #121,067  
2020-10-30, 0330

32 right now...high in the upper 30's. 1-3 inches of snow predicted, but nothing on the ground yet...looks wet outside, so I expect some icy conditions on the way to work...
 
   / Good morning!!!! #121,068  
Good morning folks

34 and rain now no snow yet, only supposed to get around an inch if any.
Any precipitation is good if it helps with this drought.

Wife and I got voting taken care of Wednesday, easy peasy only one person in front of us.
Got the plow ready to put on the tractor if needed.

Picked up grocery order yesterday and helped do some cleaning around the house.

Nothing planned for today just take it as it comes.

Enjoy your day everyone
 
   / Good morning!!!! #121,069  
56 high of 60 today very breezy 3 inches of rain yesterday .20 last night very wet outside no damage here other areas not so lucky

Paver down so no work today

Prayers for all our Country
 
   / Good morning!!!! #121,070  
Good morning, the temperature is 18°F and the high will be 32. Wind NE 6 mph. Mainly sunny.

There is a trip to North Bay in the cards for today, then maybe dig out the front mount snow blower. IF the guy in Timmins wants it to adapt to a Kubota, then I will need to remount the BH to get it out of the way and get at the blower.

I phoned MK Martin yesterday, they discontinued the front mount blowers a few years ago and don't have any, but they still have the information for them.


Have a safe and healthy day all
 

Tractor & Equipment Auctions

2015 KENWORTH T680 TANDEM AXLE SLEEPER (A52577)
2015 KENWORTH T680...
2017 Ford F-150 4x4 Crew Cab Pickup Truck (A50323)
2017 Ford F-150...
New JMR Skidloader Boom (A50774)
New JMR Skidloader...
2013 Chevrolet Caprice Sedan (A51694)
2013 Chevrolet...
8ft Fork Extensions (A50322)
8ft Fork...
John Deere 918 Flex Head (A50774)
John Deere 918...
 
Top