Good morning!!!!

[buckeyefarmer]

My back is hurting bad again. I told them hrs ago, but no meds yet.

 

[Kyle_in_Tex]

My back is hurting bad again. I told them hrs ago, but no meds yet.

I am so sorry. More prayers. Pain sucks. Morphine sucks too, but pain is worse.

 

[daugen]

and eat six prunes a day if you are taking morphine, will clog you up badly. Adding insult to injury...

 

[Thomas]

My back is hurting bad again. I told them hrs ago, but no meds yet.

...................................
Dang
You express yourself also testing,maybe time for set down w/Dr. and let the chips fall where they may...take care of yourself.

 

[daugen]

finished the welding on the mower deck today. Fabbed a new hanger bracket to replace the one that had ripped off and welded
it to a cover plate I made for the hole. Welding remains ugly but functional, another three or four coats of filler primer will hide all the bad work.
Now a huge amount of sanding, then painting. Then the fun part. Figuring out how to put it all back together.

 

[txdon]

Don, if you are measuring 13.4 V, is that with or without the charger connected ?

While you are charging, the only way to be sure how full it is is to measure current. If you disconnected the charger and read 13.4 V, then that's going to be pretty close - leave it a while to settle, then measure again. A fully charged battery will read about 12.6V

The 12.2 V you got before charging was a good sign that the battery hadn't fully discharged, so is likely to be in good condition.

After 3 days it got up to 13.6V right after taking the charger off, and then after being disconnected an hour it read 12.9. I'll see if it starts the tractor tomorrow. Thanks.

 

[Ed of all trades]

My back is hurting bad again. I told them hrs ago, but no meds yet.

Praying for you. Ed

 

[Thomas]

finished the welding on the mower deck today. Fabbed a new hanger bracket to replace the one that had ripped off and welded
it to a cover plate I made for the hole. Welding remains ugly but functional, another three or four coats of filler primer will hide all the bad work.
Now a huge amount of sanding, then painting. Then the fun part. Figuring out how to put it all back together.

..................................
Looks twice as rugged...nice. :thumbsup:

 

[newbury]

finished the welding on the mower deck today. Fabbed a new hanger bracket to replace the one that had ripped off and welded
it to a cover plate I made for the hole. Welding remains ugly but functional, another three or four coats of filler primer will hide all the bad work.
Now a huge amount of sanding, then painting. Then the fun part. Figuring out how to put it all back together.

Looking better than new!

 

[daugen]

thanks guys. When it's all finished, a lot will be hidden.
The videos coming into YouTube are amazing.
horrible devastating destruction in US Virgins, Barbuda.
Hotel where I was married on the beach, Pirate's something, is trashed.
All these people with smart cameras videotaping from hotel rooms where they are trapped,
carnage going on outside. Huge boats flipped over, and now the weather is hitting Miami.

and so it begins.
Scary First Video Miami hit by Irma Hurricane , Florida - YouTube