Good morning!!!!

   / Good morning!!!! #60,981  
71 light rain high of 78 later today. Finally finished back deck started weeding beds in rear of house two loads of weeds in ranger. Looks like an engineers holiday for me today. Been really busy so far averaging a thousand tons a week laying asphalt. A day off due to rain is welcome
 
   / Good morning!!!! #60,982  
Having been on here only six years a newbie learned a lot about tractors enough to make the right decision for me on our 5240. Some really helpful people on those threads but found this one and just stay here. The people are friendly and impart their wisdom about numerous things and adventures. A kinder gentler place so to speak. Even as I approach my mid 60s learn something new almost every day
 
   / Good morning!!!! #60,983  
If I got the story straight, Muhammad's dad's version, Muhammad and Ibrahim had the Kubotabynet forum and dad told them that one of two things was going to happen. Either Kubota would buy the site or file a cease and desist. The boys built a parallel forum and when the cease and desist came the transition was as simple as can be. Allegedly Muhammad has a photographic mind and he had all of the manuals and parts memorized for Kubotas. Someone, might have been Ron, once told me that Muhammad could cross reference the parts across models so if you needed a part for one model that wasn't available he could reference you to the same part under a different number for a different model. The kid was and is amazing.

One has to wonder if a project like Don's bridge could be done today. If you get some time locked inside with this weather check out the old ATV Bridge thread.

When I met Muhammad he was 18 (wife wanted to take him home, good looking young man). When Kubota stopped him from using their name. He was 14.
I still communicate with Garry Summers on FB. He was one of the early Moderators. From what I understand he still is. But does not spend much time here.
 
   / Good morning!!!! #60,984  
Drinking first cup of coffee. 54° with partly cloudy skies this morning. Heading to 76° with some clouds. Got detoured yesterday and forgot to cleanup drive. Will put that on top of list today. Need to get on pole barn roof and check for missed spots when doing coating. There were no leaks from storm last week. But I'm sure there are some missed spots. Then back to the animal barn repairs.
Good Morning All.
 
   / Good morning!!!! #60,985  
Sure wish I could remember names. One thread I liked was instructions on how to make pictures like my signature. Probably cannot do it again. Would have to get Drew's friend to do it.
Then there's the epic Christmas video of tractors.
 
   / Good morning!!!! #60,986  
52F partly cloudy mid 70's for high rain arriving later.

Take of early autumn weather yesterday sure felt nice :cool: but new work week upon us.

Maybe little weed puling after work if the rains hold off.

Enjoy the day all.
 
   / Good morning!!!! #60,987  
69 outside this AM. Looks to have sprinkled a little. Hope more rain is on the way.

I think I came on board to TBN right after the switch from the Kubota forum. I was looking to get a new sub-compact, but new meant really new by model type and the only thing I was getting out of TBN was stuff that made the book on how-to purchase a tractor. LOL. Is that still available? I still have that tractor and have added a few other pieces and property since.

I recall, no offense, it was a tighter community back then, with a slant towards the southern western areas.

I also recall getting involved in sending Ron a get well card, that had to go from member to member via postal and we used TBN to ferret each other out.

Have a great day all, be safe!
 
   / Good morning!!!! #60,988  
some showers overnight, warm and sticky morning, going to rain this afternoon, which like Buppies is fine with me.
Need a little break from the heat.

headed to Kubota dealer, instead of getting a bill from them for a new Echo hedge trimmer/brush cutter, I got a refund check. Hmmmm, new girl in accounting. Think I'd better go have a chat with them.

Over the weekend my Samsung Chromebook stalled due to lack of memory for the last time. Granted I'm overusing this little thing, video seems to defeat it after awhile. So....did my research, and ordered an Acer Aspire, a convertible model that folds, good for watching movies in the rv, 15.6 inches, 256gb SS memory, I7, 12gb ram.
If it comes today I'll have a good project setting it up in rainy weather.

Over the last 20+ years buying laptops, from business Toshibas to this little Chromebook, I have found the price of a good laptop was for decades over $2K. Now it's under $800. Amazing how pricing has dropped. And what really attracted me to this model, other than great reviews, is that Acer doesn't pack it with bloatware that takes forever to get rid of.

I owned a Radio Shack franchise in my very small home town for five years. I turned a "where's that thermistor?" electronic geek palace into an adult toy store. Sony and Panasonic electronics. A variety of audio and video equipment that Radio Shack would never carry. But i stocked every single one of those "parts and pieces" on those big swinging display racks that were always in the back of the older Radio Shacks. I wasn't sure what a triac did but I had one...

And this was the time PC's were coming in, and here I am selling Tandy 100's. (since we are on memory lane this morning...) You could throw a 100 off the roof and it would keep working, those early pc's were tanks. And heavy... I quickly learned that while I had to offer them, that Tandy was never going to be a good long term choice for computer. So I brought in Acer, in the mid 80's, and they were flawless computers. Never ever had a unit returned for service or problem. Of course times were simpler then, no malwares and live streaming was just a vision. So when I went looking for a conventional laptop, that wasn't too heavy (I've had the 9 pound 15 inchers before) and it was an Acer, I had a good feeling.

Now a new computer is no where as cool as a new flail mower, but maybe now my Youtube videos will no longer lock up. I don't watch any tv at all so the internet is important to me.

got on the scale this morning and smiled Down to 211, haven't seen that number in awhile. All that wood chipping and outside work in the heat just drained a few pounds off me. I've been up to 260, and have wanted to get to 200. When I was 5'11" my bmi was off but not terrible. Now that arthritis and spinal issues have dropped me to 5'9", my bmi numbers are worse and I get "the look". Of course if I got down to 180 or wherever they expect me to be, I'm likely to be in the morgue. 200 would be just fine.
Frankly if I followed a plant based diet like Don, I bet the pounds would melt off. But I sure liked my steak last night...
 
   / Good morning!!!! #60,989  
Eric, what are you electroplating for? I assume you must wear a good filter mask breathing in those fumes, safer or not. Isn't electroplating similar to powder coating?
 
   / Good morning!!!! #60,990  
Good morning all. 65 here now going to 74.:D with a 100% chance of rain expecting about 1". I joined 5 years ago and have really learned a lot that I have used and likely more that I have stored away in case the need ever arises. Today I just skip down to Good Morning and enjoy that. We are excited, today is the day I do and pick up the communication board for our family member. He has said something more than his 3 words 3 times in his life and he is pushing 50. It's in there we/he just can't get it out. With this thing he pushes a button and a mans voice says _________ relating to that button. If he can just push the buttons with out getting overwhelmed. We are praying.

Have a great day everyone. Ed
 

Tractor & Equipment Auctions

2021 FORD F-150 STX (A55745)
2021 FORD F-150...
2006 Imperial 14Ft Flatbed T/A Equipment Trailer (A50324)
2006 Imperial 14Ft...
2023 54' Hooklift Dumpster 20 Cubic Yard (A53422)
2023 54' Hooklift...
2023 DOUBLE DRUM ROLLER (A55745)
2023 DOUBLE DRUM...
378900 (A54865)
378900 (A54865)
SKIDDED FRAC TANK (A55745)
SKIDDED FRAC TANK...
 
Top