Good morning!!!!

/ Good morning!!!! #217,003  
Morning folks. My driveway base for snowblowing has turned to three inches of slush. Cringed while driving the whole way down it. Warm day with rain instead of snow here. The snow should return tomorrow though.
Thanks for the reminder. It is raining cats and dogs here. normally I go to the dump on Fridays, but I am not going to mess up my driveway which is smooth right now. It is going down to 18°F tonight and not going back up above freezing for at least 6 days.
 
/ Good morning!!!! #217,004  
56F and cloudy @ 11:00, calling for a high of 59F for the day. A few showers this morning followed by an overcast afternoon. Then back into the freezer in the coming days.

Will log another trip around the sun into the books today.

Got a bunch of short pieces of 3/4 copper cleaned up yesterday that I will use piece in the lines the laundry room.

Between that and the tempering valve for the water heater I should be able to use up most of those.

Also got the studs trimmed out to pass the supply lines through and a drop piece of 2 x 4 put up to make that one stud cavity 16" O. C.:

IMG_4267 copy.jpg

Still need to grab the right-angle adapter for the drill to get that drop screwed in all the way.

Went up to the shop yesterday and grabbed the charger for the batteries for the original B&D coredless drill, got those all charged up.

Still haven't been able to locate the HF speed control ... 🤬

Forgot to recharge the Altec RockBox day before so I was kind of off my game yesterday due to lack of tunes ... :cry:

Hope everyone is having a decent TGIF ... (y)
 
/ Good morning!!!! #217,005  
56F and cloudy @ 11:00, calling for a high of 59F for the day. A few showers this morning followed by an overcast afternoon. Then back into the freezer in the coming days.

Will log another trip around the sun into the books today.

Got a bunch of short pieces of 3/4 copper cleaned up yesterday that I will use piece in the lines the laundry room.

Between that and the tempering valve for the water heater I should be able to use up most of those.

Also got the studs trimmed out to pass the supply lines through and a drop piece of 2 x 4 put up to make that one stud cavity 16" O. C.:


Still need to grab the right-angle adapter for the drill to get that drop screwed in all the way.

Went up to the shop yesterday and grabbed the charger for the batteries for the original B&D coredless drill, got those all charged up.

Still haven't been able to locate the HF speed control ... 🤬

Forgot to recharge the Altec RockBox day before so I was kind of off my game yesterday due to lack of tunes ... :cry:

Hope everyone is having a decent TGIF ... (y)
Happy Birthday 🎂
 
/ Good morning!!!! #217,007  
67°F and .47 inches rain

Managed to break bow on glasses. A quick fix but temporary. Trip to Walmart to order new.

Dinner with the kids at the big buffet in town. Expensive but enjoyable.

They are off this morning in hopes of catching the volcano going off. Expectations are promising


Prayers for all
Be safe
Have a great tractor day
 
/ Good morning!!!! #217,009  
Good Tractor Late Morning,
Scott yes it should no problem! You radio internal tuner will tune about a 3:1 SWR range and the external tuner will tune about a 10:1 SWR range so you will turn the internall tuner off and just use the external tuner
Yes Steve, I did read that somewhere. Although I didn’t think I would need a Balun, maybe I do we will see 😉
 
/ Good morning!!!! #217,010  
Good Tractor Late Morning,

Yes Steve, I did read that somewhere. Although I didn’t think I would need a Balun, maybe I do we will see 😉
You may not "need" a balun, but I would be very surprised if a balun didn't help you and the external tuner out. To me, I think it is sensible as it deals with some of the issues that @WinterDeere pointed out above. I don't mind manual tuning, but I have always like auto tuners, both for the simplicity and for the spot on results.

Do you have the space for a delta configuration like @B7510HSD?

All the best,

Peter
 
/ Good morning!!!! #217,011  
Here's hoping the rest of the winter isn't as mild, otherwise I'll feel like a fool for buying the snowblower!
Isn’t that how it always is?!? The warmest and most-snowless three winters I’ve ever experienced occurred immediately after the purchase of my last snowblower and plow. :D

Like others have said, you’ll use them eventually, and be glad you bought them for less this year and had them ready, than paying more later.
 
/ Good morning!!!! #217,012  
You may not "need" a balun, but I would be very surprised if a balun didn't help you and the external tuner out. To me, I think it is sensible as it deals with some of the issues that @WinterDeere pointed out above. I don't mind manual tuning, but I have always like auto tuners, both for the simplicity and for the spot on results.

Do you have the space for a delta configuration like @B7510HSD?

All the best,

Peter
One note my balun also has a CMC (common mode choke) to keep RF off the feedline.
 
/ Good morning!!!! #217,013  
Went shopping in the other direction today. Decided to try mission there, since in January when you purchase a meal, you get an envelope that you bring back in February, and you get free stuff, from a soda or side to a whole meal. They have to open the envelope in Feb for you to get free whatever is in side. Anyways, had good smoked cheeseburger. Guy came around giving out samples of their cheesy potatoes, and I mentioned I didn't see them on the menu or I would have ordered them. He came by later with a bowl of them for me. I will certainly praise them online for their service.
Got pair of Jeans at that TSC. Got 2 posts i needed at that HD. So a much better outcome in the town north instead of the town south yesterday.

When I got home, BB came to greet me, but first he went under my camper where there was an orange cat, then he came to me. The orange cat reluctantly came over following BB, and let me pet him or her. It went back under the camper, and BB followed me to the house. I went back out and put some food on the porch for it, but it stayed down under the camper. It doesn't look starved.

IMG_5013.jpeg
 
/ Good morning!!!! #217,014  
Happy Birthday Rswyan 🎉

FWT I’m not sure where you are but if on east coast I think your blower will come I handy
 

Marketplace Items

John Deere 5090GN (A60462)
John Deere 5090GN...
Groundsmaster 3500-D madel 30839 (A56859)
Groundsmaster...
2017 Ford Transit Connect Cargo Van (A59230)
2017 Ford Transit...
2017 Ford F-150 Pickup Truck (A59230)
2017 Ford F-150...
2006 Dodge Ram Pickup (A56858)
2006 Dodge Ram...
2023 GREAT DANE FLP-0024-00053 53FT FLATBED TRAILER (A59905)
2023 GREAT DANE...
 
Top