gear speeds?

[Ginormous]

Is there a source somewhere that has the speeds achieved in different gears for Yanmar tractors? I thought I remembered seeing this somewhere, but I can't find it. I am personally interested in seeing them for the YM1700 and YM2210...

 

[careyo63]

 

[winston1]

the speeds for the 2210 are in that parts pdf I sent you. I know the writing is in Japanese but if you just look it over real good I think you can figure out the speeds.

 

[Car Doc]

On mine they are slow, slower, super slow and ridiculously slow then in creep they are insane slow, undetectable slow and imaginary movement. :laughing:

 

[California]

insane slow, undetectable slow and imaginary movement. :laughing:

I thought I would never use 1/1. But its ideal for lurching forward on rough ground, sneaking up on a pallet, and adjusting fork height and tilt at the last moment. While standing up ( no access to clutch pedal) to see what I'm doing.

Aside from that use, I can't imagine tilling that slow. It would take weeks.

 

[deepNdirt]

I thought I would never use 1/1. But its ideal for lurching forward on rough ground, sneaking up on a pallet, and adjusting fork height and tilt at the last moment. While standing up ( no access to clutch pedal)

No Need for Brakes either
1/1 can also be for those who have only 1 brake or none at all
incidentally which is slower, granny gear or turtle slow?

 

[silvertramp]

On mine they are slow, slower, super slow and ridiculously slow then in creep they are insane slow, undetectable slow and imaginary movement. :laughing:

:thumbsup: "imaginary movement" Great description.:thumbsup:

 

[clemsonfor]

:thumbsup: "imaginary movement" Great description.:thumbsup:

Thought that was funny too.

 

[Pete Judd]

On my 186D 1/1 I think that I could get off the tractor, and get a cup of coffee in town, and come back and the plow would not have moved 6 feet.

 

[careyo63]

I can recall when I first unloaded my 2000 off the trailer. I wanted to be careful so I put it in 1/1. It hardly moved. WT never used Low Gear at the Dealer and had me worried until I went through all the gears making sure there wasn't a problem.:confused2: