GC2400 No Start

   / GC2400 No Start #1  

Kovats

New member
Joined
May 15, 2010
Messages
5
Location
Goderich Ontario Canada
Tractor
Massey Ferguson GC2400
My new GC2400 has been a dream until today. It does not turn over when the key is turned. The obvious things like levers in neutral and fuses have been checked. I have power to all lights and to the ignition system but the starter does not engage. A little strange for 104 hours...:confused:
 
   / GC2400 No Start #2  
Can you hear the fuel pump running? Sounds like constant clicking. Have you checked your lever linkage to see if it is bound? PTO is in neutral?
 
   / GC2400 No Start
  • Thread Starter
#3  
Today I went out and turned the key and to my surprise, it started right up.
I am not certain that a couple of comments that I had made about Tiger Woods earlier in the day were some Karma coming back to pay me what I was owed. I am also a mechanic and this one has still got me stumped. I am going to continue to check all connections and cross my fingers. Thank you for your reply.
 

Tractor & Equipment Auctions

2008 Ford F-250 Knapheide Service Truck (A50323)
2008 Ford F-250...
Vicon RV1601 Round Baler (A50774)
Vicon RV1601 Round...
Kubota RTV 900 Side By Side (RUNS) (A50774)
Kubota RTV 900...
2017 Ford Escape SUV (A50324)
2017 Ford Escape...
2012 UTILITY VS2DX 53FT DRY VAN TRAILER (A52141)
2012 UTILITY VS2DX...
Bobcat 3400 4x4 Utility Cart (A51691)
Bobcat 3400 4x4...
 
Top