GC2400 No Start

   / GC2400 No Start #1  

Kovats

New member
Joined
May 15, 2010
Messages
5
Location
Goderich Ontario Canada
Tractor
Massey Ferguson GC2400
My new GC2400 has been a dream until today. It does not turn over when the key is turned. The obvious things like levers in neutral and fuses have been checked. I have power to all lights and to the ignition system but the starter does not engage. A little strange for 104 hours...:confused:
 
   / GC2400 No Start #2  
Can you hear the fuel pump running? Sounds like constant clicking. Have you checked your lever linkage to see if it is bound? PTO is in neutral?
 
   / GC2400 No Start
  • Thread Starter
#3  
Today I went out and turned the key and to my surprise, it started right up.
I am not certain that a couple of comments that I had made about Tiger Woods earlier in the day were some Karma coming back to pay me what I was owed. I am also a mechanic and this one has still got me stumped. I am going to continue to check all connections and cross my fingers. Thank you for your reply.
 

Tractor & Equipment Auctions

2014 Ford Transit Connect Van (A50323)
2014 Ford Transit...
2013 PETERBILT 365 T/A DUMP TRUCK (A51406)
2013 PETERBILT 365...
2016 Big Tex 14ft. T/A Hydraulic Dump Trailer (A50323)
2016 Big Tex 14ft...
BUSH HOG 2615 - 15' BATWING MOWER (A51243)
BUSH HOG 2615 -...
2016 Timpte Hopper Bottom (A50514)
2016 Timpte Hopper...
2015 Ford F-450 Cab and Chassis Truck (A51692)
2015 Ford F-450...
 
Top