Garage hacks, adjustments and annoyances.........

   / Garage hacks, adjustments and annoyances......... #121  
Yup, that is part of the Rocky Mountains.

Making any headway on the lathe stand?
 
   / Garage hacks, adjustments and annoyances.........
  • Thread Starter
#122  
Not making any progress at all, been having to many sunshiny Saturdays, and my sons been out straight trying to catch up on shingle orders. Last Saturday was a golden opportunity to work on lathe bench but no power so it's kicked ahead a couple more weeks, as of right now the ETA for up and running is Memorial Day weekend, you can mark my words on that, but use chalk................
 
   / Garage hacks, adjustments and annoyances.........
  • Thread Starter
#123  
I'm a inch closer today. I decided on 1/8" steel for the lathe stand top because steel is more versatile and easiest to work with, next might be aluminum, wood, cement, what ever's would come under designated purpose applications.

I called first to the steel place make sure they was open, they said yes but hvae to order over phone, pick it up when I get there cant come in to office, so when I showed up I called again then in a few minutes the lady came out with the sales slip and showed where the steel sheets was. So we go out to the shop and the attendant said you can back the pickup in if you want and I'll lift with the crane, I said it's not that heavy is it, I started to pick up the 4x6 piece and said uh yeah lets back the pickup in.......
IMG-5781.JPG IMG-5783.JPG
 
   / Garage hacks, adjustments and annoyances......... #124  
You're moving right along. What I refer to as, steady by jerks.
 
   / Garage hacks, adjustments and annoyances.........
  • Thread Starter
#125  
Moving right along..... Picture sequence is from right to left, ended up making the bench a wee bit bigger, 26X62.
IMG-5947 (1).JPG IMG-5946.JPG IMG-5945 (1).JPG IMG-5944 (1).JPG
 
   / Garage hacks, adjustments and annoyances.........
  • Thread Starter
#126  
Had to add about a foot on the back panel, then we slid the bench over to it's location, then set the back panel upright, screwed to wall, tack weld to bottom, un-screw back panel slide back away from wall then weld joint, then clean up and paint, busy day.

IMG-6044.JPG IMG-6047.JPG IMG-6050.JPG

IMG-6054.JPG 86890.jpg
 
   / Garage hacks, adjustments and annoyances.........
  • Thread Starter
#127  
Now the next part will be bolting down, framing the lathe bench in so's to keep dust off, but least now it's finally off the floor.
DrmSsi2h.jpg




qBYxQXJh.jpg
 
   / Garage hacks, adjustments and annoyances......... #128  
Oldpath, man, nice!
 
   / Garage hacks, adjustments and annoyances......... #129  
I like the white background.
 
   / Garage hacks, adjustments and annoyances......... #130  
You guys are doing a great job. That looks really good.
 

Tractor & Equipment Auctions

2017 Ford F550 4x4 Bucket Truck - 45FT Terex TL40 Boom, Powerstroke Diesel, Utility Bed, 54K Miles (A51039)
2017 Ford F550 4x4...
2010 John Deere Gator UTV (A49461)
2010 John Deere...
71065 (A49346)
71065 (A49346)
2022 CATERPILLAR CS54B SMOOTH DRUM ROLLER (A51242)
2022 CATERPILLAR...
P&H OMEGA 20-20 (A50854)
P&H OMEGA 20-20...
2014 International DuraStar 4300 Terex BT3063 30,000LB Crane Truck (A48081)
2014 International...
 
Top