Fuse

[yotehunter66]

Anyone know how you add a new fuse to your fuse block? Can't use an add a fuse with the cover I have. They give you all those extra slots in the existing fuse block so you must be able to add one.

 

[davesl708]

There are terminal ends you can get at most auto stores or a Radio Shack type store to install them.

 

[yotehunter66]

Do you just run one wire and the other is connected to a bus bar?

 

[pat32rf]

I like to add a pigtail with a built in fuse holder to the starter solenoid if it is in a protected spot, like oh my JD 4300

 

[yotehunter66]

I bought one of those and thought about coming right off the battery.

 

[davesl708]

Do you just run one wire and the other is connected to a bus bar?

One wire goes to power(buzz bar or direct) the other goes to the protected device.

 

[powerscol]

A picture would help, but most fuse boxes I have seen already have an AUX wire installed (usually bundled and taped up somewhere), you just install a fuse in that slot to make it hot. Check you owners manual to see if you have an AUX tap somewhere.

 

[lennyzx11]

http://static.summitracing.com/global/images/prod/mediumlarge/hla-h84960091_w_ml.jpg

If that worked right, this is what I've used in the past.

These are from Summit racing. About 6 bucks.

 

[Rocky Hoffler]

a quick way is to use a add a fuse either in ato or atm if this is the style you have