From everything I'm reading online, the fuel system is gravity fed to the filter & injection pump.. NO lift pump.
So it would seem your asking about an injection pump..
Its the little pump that sits on the side of the engine w/the 2 steel lines going up to the top of the engine[head] connecting to the injectors??
I rebuild them [for a living] or you can buy them online.
Pump guy.......can you get all the parts and packings to rebuild the pumps on th 50 series JD tractors (JD950)? I decided not to disassemble the no 1 pipe for the purpose of timing the pump because one of the packings wasn't available. I ended up putting it back on with the same amount of shims and all seems fine. I didn't want to disassemble and then the old packing be unusable and ruin an otherwise good pump. Should have sent you a message. Didn't think about it at the time.
From everything I'm reading online, the fuel system is gravity fed to the filter & injection pump.. NO lift pump.
So it would seem your asking about an injection pump..
Its the little pump that sits on the side of the engine w/the 2 steel lines going up to the top of the engine[head] connecting to the injectors??
I rebuild them [for a living] or you can buy them online.
