CJBOTA
Gold Member
Can anyone tell me if is possible to put a front snow plow on my Kubota
L3700? Thanks!
cj
L3700? Thanks!
cj
Snow Attachments Front snow plow ?
- Thread starter CJBOTA
- Start date
- Views: 1483
Jeepnford
Gold Member
While I'm not familiar with a 3700 here's a Kubota plow build. Do a search on plows and you'll find several builds.
http://www.tractorbynet.com/forums/customization/131136-snow-plow-adapted-fel.html
If you're wanting one pre-built Meyer plow makes them for CUT's.
http://www.tractorbynet.com/forums/customization/131136-snow-plow-adapted-fel.html
If you're wanting one pre-built Meyer plow makes them for CUT's.
jpm
Platinum Member
sure you can,do you have a q/a front then its eazy.if you have an older pin type its harder,but it can be done
Are you looking to have a plow to use on the FEL or a frame mounted unit like smaller tractors and trucks?
You can do either one.
A plow for the FEL on be bought from a few different places, like your Kubota dealer, on-line dealers, and around here even truck equipment dealers sell FEL plows for tractors/payloaders/skidsteers.
If you are looking for a frame mounted plow. I know that Meyers makes kits for this. Or a good welding shop could take any older truck plow and make a mount for it.
You can do either one.
A plow for the FEL on be bought from a few different places, like your Kubota dealer, on-line dealers, and around here even truck equipment dealers sell FEL plows for tractors/payloaders/skidsteers.
If you are looking for a frame mounted plow. I know that Meyers makes kits for this. Or a good welding shop could take any older truck plow and make a mount for it.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,867
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
It can be done,just matter of what kind of setup.
nybirdman
Super Member
I had a six foot snow plow mounted on a L3130 Kubota useing a sub-frame.this required removal of the FEL(at least on this model)..this was purchased from my dealer@about $2500.00(with power angle).
My current L4240 has a FEL mounted 8ft.Curtis with power angle.I much prefer this set-up.The plow is quick attach....only minutes and the bucket is back on if needed.Cost about $2,000 with purchase of used blade.
Many debates here about FEL mounted snow plows but I have had no problems.
My current L4240 has a FEL mounted 8ft.Curtis with power angle.I much prefer this set-up.The plow is quick attach....only minutes and the bucket is back on if needed.Cost about $2,000 with purchase of used blade.
Many debates here about FEL mounted snow plows but I have had no problems.
