From a 20 Year old B7100 to a B7610 review

   / From a 20 Year old B7100 to a B7610 review #1  

Raddad

Silver Member
Joined
Sep 11, 2006
Messages
212
Location
Michigan
Tractor
Kubota B7100 & B7610
Please see the attached B7100. I bought it new more than 20 years ago with a gear transmission, 4 wheel drive, Rear mount Woods mower and a rear mount Woods blade. I have 4000 hrs on it and had only one problem with the shaft that connects to the front axel about 10 years ago. I'm going to have the sheet metal repainted and give it to my son Raymond. I am amazed that Kubota still make all the stickers for this old tractor.

I have 50 hrs. on my new B7610 and you can see the attached photo. I have the FEL, 54"MMM, grass colector and a Land Pride rear blade for the new tractor. Raymond and I will share the old Land Pride 72" rake and the old Howard rototiller. Below are issues and impressions from a long time Kobata user.

Hydrostatic transmissions are the greatest.

The cruse controll sucks.

I had to modify the mower to increase the rear tread width.

I don't need to swing my leg over the steering wheel to get on and off.

I should have gotten the front end loader 20 years ago.

It is harder on the grass than the old lighter B7100.

The grass catcher works great but sure is loud.

I keep snagging my pants on the left hand levers when I get on and off the tractor.

The fuel filler should be on the side of the tractor not in the center as 5 gallons of fuel is hard to hold above the tractor when the FEL is removed.

It's nice to have a gas gauge.

The ROPS is taller and needs to be lowered to fit in my garage.

The power steering is a great feature.

I found the connector for the rear mounted lights thanks to someone on this forum.

I have an alignment problem with the idler pulley on the mower deck and a very small leak in one of the hydraulic hoses on the FEL that the dealer is taking care of.

The mower transport pins are impossible to install and remove.

I am impressed with how strong the FEL is but dissappointed in the volume of the 48" bucket.

The FEL makes installing and removing the MMM alot easier.

There isn't a horn for the kids to TOOT!:(
 

Attachments

  • 100_1442_edited.JPG
    100_1442_edited.JPG
    754.5 KB · Views: 1,195
  • 100_1443_edited.JPG
    100_1443_edited.JPG
    434.6 KB · Views: 1,072
   / From a 20 Year old B7100 to a B7610 review #2  
If I am wearing shorts the levers get caught when I get off the tractor too especially on the passenger side. It wiped me out once already. Now I just use the driver’s side because the levers are in a different position there
 
   / From a 20 Year old B7100 to a B7610 review #3  
I quit pinning my MMM up. I found it was just as easy to take it off instead of pinning it up.
A gas guage isn't going to do you a lot of good for diesel:D (I know what you mean, I just having fun).
 
   / From a 20 Year old B7100 to a B7610 review #4  
Just curious. Why did you have the tread going backwards on your old 7100?
 
   / From a 20 Year old B7100 to a B7610 review #5  
i have ripped a few pairs of shorts getting off my b7510. i had convinced myself it was just me. i had never read about it before.
 
   / From a 20 Year old B7100 to a B7610 review
  • Thread Starter
#6  
I never noticed that they are backwards. They have been like that since the dealer replaced them 5 years ago.
 
   / From a 20 Year old B7100 to a B7610 review
  • Thread Starter
#7  
The good news is it's Raymonds tractor now. I'll tell him he should switch them or drive arround backwards when he mows.
 
   / From a 20 Year old B7100 to a B7610 review #8  
Sweet looking 7100!! tough looking little boger. We won't mention the tires again. :)
 
   / From a 20 Year old B7100 to a B7610 review #9  
DVR said:
i have ripped a few pairs of shorts getting off my b7510. i had convinced myself it was just me. i had never read about it before.
sounds like a new thread subject
 
   / From a 20 Year old B7100 to a B7610 review #10  
It's an insignificant point but the bucket on your LA352 loader I believe to be 50" and not 48". I know mine is.
 

Tractor & Equipment Auctions

2008 Ford F-250 Knapheide Service Truck (A50323)
2008 Ford F-250...
2022 LEGUAN 190 SPIDER LIFT (A51242)
2022 LEGUAN 190...
American Sanders EZ-8 Electric Floor Sander (A49461)
American Sanders...
2020 Barreto 20RTK 36in Stand-On Trencher (A49461)
2020 Barreto 20RTK...
2007 MD-8 TRIPLEX PUMP POWERED BY 1050HP MTU ENGINE (A50854)
2007 MD-8 TRIPLEX...
2015 Ford F-150 Ext. Cab Pickup Truck (A50323)
2015 Ford F-150...
 
Top