Ford 3910

   / Ford 3910
  • Thread Starter
#51  
Richard,

Do you have a picture with the telescopic stabilizers in place? I ordered some but I have the straight brackets like the pick you posted and I'm not sure if I should order the angled version so there is no binding. Thanks in advance for your help.
 
   / Ford 3910 #52  
Richard, Do you have a picture with the telescopic stabilizers in place? I ordered some but I have the straight brackets like the pick you posted and I'm not sure if I should order the angled version so there is no binding. Thanks in advance for your help.

Cool deal, looking forward to the progress!
 
   / Ford 3910 #53  
I dont have a good pic but yes you need those angle brackets they'll clamp to the axle housing outside of the fender clamps. I'll try to remember to get a pic today.
 
   / Ford 3910
  • Thread Starter
#54  
I dont have a good pic but yes you need those angle brackets they'll clamp to the axle housing outside of the fender clamps. I'll try to remember to get a pic today.

Thanks for the info! I'll just give them a call today and have them change the order so that it includes the bracket and u-bolts. It's actually 15 to 20 bucks cheaper per side to buy the kit. I think they are waiting on one part before they ship everything (I'm not in a hurry). Glad I thought about it before they shipped everything.
 
   / Ford 3910 #55  
image-1467256185.jpg

Here is a pic of the stabilizer and bracket.
 
   / Ford 3910
  • Thread Starter
#56  
View attachment 462858

Here is a pic of the stabilizer and bracket.
Thanks for the pic! That helps a lot. I went ahead and got the angled brackets and u-bolts. Now I just need to source a nose cone and grill. The prices on ebay seem to be all over the place on the grills. I found a couple for around $40 to $50, but I'm a little worried about fitment issues. There are no part reviews on ebay that I'm aware of so I'm kind of taking a leap of faith if I order something.
 
   / Ford 3910 #58  
Thanks for hookin him up with the pic Happy!! I'm at the farm now and just remembered the pic ordeal. Thought I'd check TBN to make sure I got the pic he needed. That's exactly what I would have taken. :)
 
   / Ford 3910
  • Thread Starter
#59  
Thanks for hookin him up with the pic Happy!! I'm at the farm now and just remembered the pic ordeal. Thought I'd check TBN to make sure I got the pic he needed. That's exactly what I would have taken. :)

You guys are awesome! Thanks again for all of your help. I can't wait to get the hitch parts. The first thing I'm going to do is bushhog my field (can't wait). Will make sure to take some good high quality video and post it up here.

Justin
 
   / Ford 3910 #60  
Ouch! That is a rather ugly looking valve stem area. CaCl is apparently eating your rims from the inside.
Good eye, I checked it out tonight, valve stem had a slow and I'm guessing intermittent leak that had probably gone on for a while. The tool end of the cap had rotted off and the calcium chloride must have occasionally leaked out through the hole, it was dry on inspection. I pulled the removable core, wire brushed everything and replaced the core assembly. Rim had rust scale on the outside around the stem, but seems solid after I got the scale off. Glad you noticed it!! That's the beauty of this forum and sharing!!
image-70645965.jpg The culprit
 

Tractor & Equipment Auctions

2021 Case Trident 5550 Spreader (A52128)
2021 Case Trident...
1989 Freightliner FLD120 (NEW CAT 3406A, NEW REAR ENDS, CLUTCH) (A50397)
1989 Freightliner...
2012 Volkswagen Jetta Sedan (A50324)
2012 Volkswagen...
(2) 500 GAL WATER TANKS (A50854)
(2) 500 GAL WATER...
2014 INTERNATIONAL 7400 SBA 42 LUBE TRUCK (A51406)
2014 INTERNATIONAL...
2018 CATERPILLAR 299D2 SKID STEER (A51242)
2018 CATERPILLAR...
 
Top