fertilizing before no till

/ fertilizing before no till #1  

Kodiak45

Gold Member
Joined
Feb 11, 2013
Messages
328
Location
SC
Tractor
long 2460 - belarus 250 - JD 4230 - Kioti DK40SE
I need some advice or opinions on how I should apply my fertilizer before no-tilling a few acres of oats. I am getting the no till drill from the local conservation district and its a new piece of property that I got permission to hunt. My question is if I should use the drill to apply the fertilizer before planting, broadcast it, or mix it in with the seed when I plant. The ground hasn't been tilled in many many years as far as I can tell and I'm afraid I might need to drag harrow the residue prior to attempting to drill. I'm hoping the coulters on the drill will allow enough down pressure to get a good planting. So what do you think about the method of fertilizer application?

The fields I'm planting were hayfields at one time.
 
/ fertilizing before no till #2  
If it is a real honest to goodness no-till drill, it will go through whatever you got on the surface. It should also have multiple boxes, one for your oat seed and another for fertilizer. Check with the district office, they should be able to assist you with the set up of the drill. They may restrict the use of fertilizer in their drill due to its corrosive nature, but they should have ideas on fertilizer placement. I would probably broadcast the fertilizer, unless the drill is fertilizer friendly and sidebands it next to seed placement.
 
/ fertilizing before no till
  • Thread Starter
#3  
Its a great plains no till and I know it has small seed boxes on it, but not sure on the fertilizer boxes.
 
/ fertilizing before no till #4  
My truax drill which is similar to the one you have forbids fertilizer usage. I doubt you can spread fertilizer with it. What we do is bush hog the field, drill the seed, and fertilize later with a cone spreader , after a week or two. Try to drill when the ground has been softened by a rain What are you planting? Herbiciding also helps.
 
/ fertilizing before no till
  • Thread Starter
#5  
i'm planting about 3 or 4 acres of oats.
 
/ fertilizing before no till #6  
if the notill drill has a fert box id put the fert down with the seed.
 
/ fertilizing before no till #7  
Should be simple. Bush hog it low. Wait for some rain then drill. Oats are easy , will germinate quickly. Then fertilize anytime afterwards. Sitting in a stand now looking at one I planted a month ago.

image-1437700970.jpg
 

Marketplace Items

(INOP) 2018 BOMAG BMP8500 TRENCH COMPACTOR (A60429)
(INOP) 2018 BOMAG...
2009 VOLVO VNM 300 6X4  T/A DAY CAB TRUCK TRACTOR (A59906)
2009 VOLVO VNM 300...
ARTS WAY PM25 FEED MILL GRINDER MIXER (A63291)
ARTS WAY PM25 FEED...
2017 Ford F-550 4x4 Venturo ET25KX 2 Ton Crane Service Truck (A61573)
2017 Ford F-550...
2014 Nissan Quest Van (A61574)
2014 Nissan Quest...
2012 Ford Expedition SUV (A61574)
2012 Ford...
 
Top