FEL Snowplow

[kennyd]

I pretty much finished it today, Blew off work-there's tractor stuff to do /forums/images/graemlins/wink.gif

Back home now for final assembly, the cylinder's and trip springs are attached.

 

[kennyd]

The mouldboard is mounted temporarly so it can be marked for cutting.

 

[kennyd]

The mouldboard is cut and attached, and so is the cutting edge.

 

[kennyd]

Skid shoes installed and set for 1/2" of blade clearence.

 

[kennyd]

The plumbing is completed, I added adjustable in-line flow restricters because the plow was moving way to fast at full throttle.

 

[kennyd]

Side view of plumbing...

 

[kennyd]

And here is a view of the whole setup, ready for snow...

 

[kennyd]

Last view...

It is 62* out and cloudy, no snow this week...

 

[PineRidge]

Nice job Kenney. If you were closer we would let you try it out on our drive (once we get more snow that is).

What did you use to cut all that steel, a chopsaw?

 

[kennyd]

WinchMan,
I am going to try this picture again, It is of the JD FEL Plow on a 4710 tractor with a 460 FEL...

Here goes /forums/images/graemlins/confused.gif