FEL rebuild

   / FEL rebuild
  • Thread Starter
#11  
Tonight I welded two beer cans together with the TIG. How's that for useful?:laughing:
I'd say that's super useful if they both still have beer in them ;)

There's actually a mig welder in the shed but I haven't used it much. Maybe this is the project to start learning...
 
   / FEL rebuild #12  
I'd say that's super useful if they both still have beer in them ;)

There's actually a mig welder in the shed but I haven't used it much. Maybe this is the project to start learning...

LOL! I'd have to change clothes for sure. I only had 2 blow throughs on this one and that is after probably 20 tries less successful. I can only imagine what a 2000 degree arc would do with pressurized Miller Lite. I'll have nightmares about it.:eek:
 
   / FEL rebuild
  • Thread Starter
#13  
Would this be an appropriate controller for my 24HP machine? I'll have to do some plumbing but some of the hoses are shot so I think that's inevitable. This looks to have regen on the dump and float on the other spool. Is there anything else I should be paying attention to when shopping for these?
 
   / FEL rebuild
  • Thread Starter
#14  
I also wonder if such a controller could be mounted horizontally such that the hoses enter from below and the joystick is parallel to the ground and points toward the driver's seat. Do these things have an "orientation"?
 
   / FEL rebuild #15  
You can mount them any way you want as long as you know the orientation.
 
   / FEL rebuild #16  
I also wonder if such a controller could be mounted horizontally such that the hoses enter from below and the joystick is parallel to the ground and points toward the driver's seat. Do these things have an "orientation"?

That's just like mine. Price has gone up, but I really like it. You can set it up for power beyond as well. Mine is mounted very near horizontal. I used a C-clamp to find the most ergonomic angle befoer drilling the mount holes. BTW, the warranty is voided if you paint it so I didn't. Probably will paint it eventually since its been on for nearly four years.
 

Tractor & Equipment Auctions

New Kivel 4200 lb. Skidloader Forks (A50774)
New Kivel 4200 lb...
2018 INTERNATIONAL LT625 SLEEPER (A51222)
2018 INTERNATIONAL...
2021 CATERPILLAR 259D3 SKID STEER (A51242)
2021 CATERPILLAR...
2021 Polaris General XP 4 1000 4x4 Side by Side (A49461)
2021 Polaris...
2005 STERLING LT8500 SERIES MIXER TRUCK (A50854)
2005 STERLING...
Miller Bobcat 225G AC/DC Welder Generator Set (A49461)
Miller Bobcat 225G...
 
Top