I have a bad switch on the clutch safety switch. This is the one that won't allow the tractor to start unless the clutch is depressed. Took it out and wiggled it around and it started working. Now nothing I can do will allow the tractor to crank. This thing has 4 connector wires and I am seeing a new one looks like it's about $300. wow a switch can't cost that much. I know I probably won't get any help with bypassing the switch. Someone please help
Farmtrac 300 DTC won't start
- Thread starter trumanb
- Start date
- Views: 11564
Roadworthy
Elite Member
Gee, my Craftsman mower has a switch like that. It's really two switches in one. One set of contacts is normally open. When you depress the clutch they close. The other set is normally closed. When you depress the clutch they open. To bypass the switch you need to leave one pair of wires open. The other pair needs to be connected. You'll have to find a wiring diagram for your tractor. That's just how my mower seat is wired. I will concede $300 seems a bit steep for one switch. You may wish to check eBay.
ptsg
Super Member
Found one for 54$. Is this it? That part number does match with the one on the parts manual.
SWITCH ASSY-START/PTO-TRG750
Another one for 43$:
LG233 - Switch, Start/PTO for FarmTrac Tractors | Up to 6 % off Dealer Prices | TractorJoe.com
SWITCH ASSY-START/PTO-TRG750
Another one for 43$:
LG233 - Switch, Start/PTO for FarmTrac Tractors | Up to 6 % off Dealer Prices | TractorJoe.com
decableguy2000
Bronze Member
- Joined
- Aug 1, 2004
- Messages
- 50
toothycritter
New member
- Joined
- Mar 11, 2025
- Messages
- 1
- Tractor
- Keyuser1
Hello i know this is old just curious if tractor would still turn over but not start with the bad switch.
No, engine will not turn over as part of the start circuit.
Here are some similar links:
