F2560 hydrostatic transmission fill and drain

[Mikefromcny]

Hi all,

2004 f2560 owner here. 2500 hours. Ordered a service manual but haven't seen it yet. Would anyone happen to know where the fill/drain would be on the transmission? I've looked all over and it isn't super obvious.

 

[RjCorazza]

Routine maintenance should be covered in an operator manual, which may be available on the web.

 

[Barnbuilder]

Make sure you clean the screen. Mine was full of trash.

 

[Mikefromcny]

Make sure you clean the screen. Mine was full of trash.

Where is that located? Sounds like I need to pull the sheet metal off and give it a good pressure washing.

 

[Barnbuilder]

I have a 3680 so not sure it's same location. Right side of transmission. It looks like a bolt that comes out.

 

[Pete6114]

Hi all,

2004 f2560 owner here. 2500 hours. Ordered a service manual but haven't seen it yet. Would anyone happen to know where the fill/drain would be on the transmission? I've looked all over and it isn't super obvious.

This is my F2690. Might be identical on your F2560.

 

[arto98607]

Where is that located? Sounds like I need to pull the sheet metal off and give it a good pressure washing.

I have F2560 operators manual in pdf and can email it if you send me a private message.

Pages 40 & 41 show exactly where the strainer and drains are.