exhaust parts...

[gravelman]

Hi folks...gravelman here. i have a 2016 Kubota B2650 the exhaust makes loader arm and area around it all black...would like to get 90 degree elbow to redirect Do you know where i could find exhaust parts, fittings?? Maybe tractor supply has this stuff , not sure. thanks much

 

[ProjectKing]

Hi folks...gravelman here. i have a 2016 Kubota B2650 the exhaust makes loader arm and area around it all black...would like to get 90 degree elbow to redirect Do you know where i could find exhaust parts, fittings?? Maybe tractor supply has this stuff , not sure. thanks much

They have some sections of exhaust pipe at AutoZone. You can get some of that and experiment. You can also get a section of pipe and have it bent some by a muffler shop. I made a exhaust extension for my L2501 before I got rid of it and got a L3301.

 

[gravelman]

perfect...thank you very much

 

[ovrszd]

You need an accurate measurement of the exhaust pipe diameter before going shopping for an elbow.

Very common problem. Manufacturers just put on enough pipe to get the exhaust away from the tractor's painted surfaces. The FEL isn't considered.

When you resolve this problem take some pictures and start a thread. You know all the other 2650 owners need a fix also.

 

[jmoneil]

I made a similar modification to my MX5200. Mainly to divert the exhaust away from the operator. Did measure the diameter of the exhaust and ordered the desired exhaust tip. Removed the existing heat shield.

View attachment 495069View attachment 495070

 

[gravelman]

ok, will do... thanks again

 

[gravelman]

wow, like that chrome look....

 

[jmoneil]

wow, like that chrome look....

I wasn't really looking for the chrome, but couldn't find 1.5 inch diameter that I needed in a stock finish. Now that it is on, I do like the way it looks.

 

[ProjectKing]

I wasn't really looking for the chrome, but couldn't find 1.5 inch diameter that I needed in a stock finish. Now that it is on, I do like the way it looks.

Any concern with high exhaust temps? Your tractor has a dpf system I think.

 

[gravelman]

what does dpf system mean... if it that extra emmisions stuff...no it does not have that

 

[joeyd]

I also made a similar mod on my tractor. I measured the OD of my current exhaust and went to a muffler shop and for under $5.00 they came up with this and the clamp.

 

[ProjectKing]

I also made a similar mod on my tractor. I measured the OD of my current exhaust and went to a muffler shop and for under $5.00 they came up with this and the clamp.

View attachment 495758 View attachment 495759

Looks nice! That's a bargain!