Everything Attachments

Status
Not open for further replies.
   / Everything Attachments #2,011  
I'm just into showing off the attachments, and I sit in the office in front of the factory. Here's another good one, showing just how strong the Hardox AR450 steel wear plate is.

This is one of our Wicked Toothbars.
Travis


Ted is all about best safety practices. :D
 
   / Everything Attachments #2,012  
My best friend needed an old shed torn down. I transported the tractor from the farm and put the Wicked 55" Root Grapple to work. The grapple saved our backs and the tractor/grapple combo made short work of the project. The grapple has been the most used implement that I have purchased and the Wicked has handled everything I have tossed at it.

Resized_20200903_171558.jpg
Resized_20200903_171724.jpg
Resized_20200903_172438.jpg
Resized_20200903_171827.jpg
Resized_20200903_180036.jpg
 
   / Everything Attachments #2,013  
Are these new ripper shanks going to be interchangeable with a current extreme box scrapper?
 
   / Everything Attachments #2,016  
My best friend needed an old shed torn down. I transported the tractor from the farm and put the Wicked 55" Root Grapple to work. The grapple saved our backs and the tractor/grapple combo made short work of the project. The grapple has been the most used implement that I have purchased and the Wicked has handled everything I have tossed at it.

View attachment 668584
View attachment 668585
View attachment 668587
View attachment 668586
View attachment 668588

Awesome pics, man! Wicked 55 surely does maximize a compact tractor's ability.
Thanks for sharing!!
Travis
 
   / Everything Attachments #2,017  
On September 19th will be one year from when I ordered my 55" Wicked Grapple. I will admit, when I was paying for it, I wasn't sure that the grapple would be worth the money.

One year later, I have tackled lots of projects. As you can see by my other post, I have used the grapple to move LOTS of brush and trees. In addition, I have used the grapple for 'non' listed uses. I have dug up, picked up, and transported old hay wagons and other implements. I have used it to load our trailer with scrape metal. The grapple has torn down 4 buildings (chicken coup, two hog houses, and a shed).

As you can see by the picture, I have worn the paint off the tines and parts of the grapple.
Resized_20200907_100436.jpg

I have had zero issues with the grapple. The only thing I would change on the grapple, it would be to add same metal meshing/protection on the back of the grapple to protect from brush/debris making it towards the grill. I did add protection to my grill guard and would recommend if you are going to be using the grapple to add protection otherwise you will end up damaging your radiator.

Is the grapple costly? Yes. Is it worth the cost? In my case, absolutely and I wouldn't hesitate to purchase it again! The grapple has taken on every task I have thrown at it and the grapple is matched well with my L3560. The sales department was great when I placed the order and answering questions. Thankfully, I haven't had to find out about the service department because the grapple has been issue free.

All that to say, the 55" Wicked Grapple has been a great product and I look forward to many more years of use from it.
 
   / Everything Attachments #2,018  
Anyone have a landscape rake? I’m thinking about adding wicked tooth bar and maybe the landscape rake.

I have rear blade, pallet forks and a BB.
 
   / Everything Attachments #2,019  
On September 19th will be one year from when I ordered my 55" Wicked Grapple. I will admit, when I was paying for it, I wasn't sure that the grapple would be worth the money.

One year later, I have tackled lots of projects. As you can see by my other post, I have used the grapple to move LOTS of brush and trees. In addition, I have used the grapple for 'non' listed uses. I have dug up, picked up, and transported old hay wagons and other implements. I have used it to load our trailer with scrape metal. The grapple has torn down 4 buildings (chicken coup, two hog houses, and a shed).

As you can see by the picture, I have worn the paint off the tines and parts of the grapple.
View attachment 669518

I have had zero issues with the grapple. The only thing I would change on the grapple, it would be to add same metal meshing/protection on the back of the grapple to protect from brush/debris making it towards the grill. I did add protection to my grill guard and would recommend if you are going to be using the grapple to add protection otherwise you will end up damaging your radiator.

Is the grapple costly? Yes. Is it worth the cost? In my case, absolutely and I wouldn't hesitate to purchase it again! The grapple has taken on every task I have thrown at it and the grapple is matched well with my L3560. The sales department was great when I placed the order and answering questions. Thankfully, I haven't had to find out about the service department because the grapple has been issue free.

All that to say, the 55" Wicked Grapple has been a great product and I look forward to many more years of use from it.

Good stuff, man! Thanks so much for taking the time to provide feedback for others.

I see something you could add to give those lower tines extra protection. These plates would update it similar to our new lower laminated tine design. The set is $92 shipped.

55support.jpg


The new lower tine design looks like this..

94742000_10156886071786809_5638988508539387904_o.jpg


IMG_20200610_214148_840.jpg


Just a thought. We're constantly tweaking and improving our products when we see an opportunity. You're welcome to call me if you'd like to get a set.
Travis
 
   / Everything Attachments #2,020  
Good stuff, man! Thanks so much for taking the time to provide feedback for others.

I see something you could add to give those lower tines extra protection. These plates would update it similar to our new lower laminated tine design. The set is $92 shipped.

View attachment 671545

The new lower tine design looks like this..

View attachment 671546

View attachment 671547

Just a thought. We're constantly tweaking and improving our products when we see an opportunity. You're welcome to call me if you'd like to get a set.
Travis

I will have to ask my nephew if he is willing to weld those on for me. He has the welding talent, not his uncle.
 
Status
Not open for further replies.
 

Tractor & Equipment Auctions

H & S High Capacity Hayrake (A50515)
H & S High...
E-Z Trail Head Cart (A50514)
E-Z Trail Head...
2017 Buick Regal Sedan (A50324)
2017 Buick Regal...
2013 BMW X5 xDrive50i AWD SUV (A50324)
2013 BMW X5...
2015 GMC Arcadia SUV (A50324)
2015 GMC Arcadia...
2025 CFG Industrial TK35R Mini Track Loader Skid Steer (A50322)
2025 CFG...
 
Top