Everything Attachments

[sea2summit]

Travis,

I’m eying a R530...any official opinion on how well an EA grapple would hold up to it?

 

[CajunRider]

Travis,
I have your 6ft rotary cutter. What is the minimum PTO HP I can get by with your cutter? My tractor is crapping out and I'm thinking about down sizing.

Thanks in advance.

 

[EverythingAttachments]

Travis,

I知 eying a R530...any official opinion on how well an EA grapple would hold up to it?
View attachment 548994

It's one heck of a strong grapple for the intended tractors, but the R530 is a different animal...
It's a 9,000+ pound machine with a 6,000+ pound tipping load and 7,700 pound breakout force.
All that means it's a VERY capable machine, but good common sense goes a long way.
I wouldn't be concerned with simply lifting anything.
Just you use it responsibly....don't aggressively push difficult/stumpy/rocky ground...don't pry/grub in awkward directions...twist could also be a concern with articulated machines.
Travis

 

[EverythingAttachments]

Travis,
I have your 6ft rotary cutter. What is the minimum PTO HP I can get by with your cutter? My tractor is crapping out and I'm thinking about down sizing.

Thanks in advance.

Our 6' Xtreme Rotary cutter is quite hefty with some good sized blades and blade pan, so I'd want to stay around 30+ PTO horsepower to efficiently run it.
Travis

 

[scaredychicken]

are there any Dealerships for these attachments in BC, Canada ?

 

[EverythingAttachments]

are there any Dealerships for these attachments in BC, Canada ?

We're factory direct. Several dealers across the US order multiple Wicked Grapples at a time because they say it's easy to sell tractors if they're Wicked equipped, but we do not have dealer prices.
We do frequently ship to Canada and will be glad to quote shipping for you if you email the request to sales@everythingattachments.com.
Thanks for visiting!
Travis

 

[goeduck]

We're factory direct. Several dealers across the US order multiple Wicked Grapples at a time because they say it's easy to sell tractors if they're Wicked equipped, but we do not have dealer prices.
We do frequently ship to Canada and will be glad to quote shipping for you if you email the request to sales@everythingattachments.com.
Thanks for visiting!
Travis

Seems like EA could swing an OEM deal with the manufacturers. You do have both the cool and wow factor locked up. To a large extent, who uses their bucket as much as a grapple? Get some orange paint and sell them to Kubota and Kioti. Then red, green, blue... and you are all set.

 

[EverythingAttachments]

Seems like EA could swing an OEM deal with the manufacturers. You do have both the cool and wow factor locked up. To a large extent, who uses their bucket as much as a grapple? Get some orange paint and sell them to Kubota and Kioti. Then red, green, blue... and you are all set.

I'm sure we could easily sell them to manufacturers and have even been approached recently. BUT, selling to dealers would really go against a big part of our business model. Factory Direct. No Dealers, No Distributors, No Outside Sales Reps, No Printed, TV, Magazine, Billboard advertising.
The winner, who gets the best Quality and Value, is YOU GUYS!! :thumbsup:
Travis

Orange Paint? Check!

 

[TooRow]

Hey, ETA!
Are there any plans for bucket teeth or at least something to protect the leading edge of a FEL bucket?

 

[EverythingAttachments]

Hey, ETA!
Are there any plans for bucket teeth or at least something to protect the leading edge of a FEL bucket?

I do not foresee us making one in the near future, but we do have some great offerings by Construction Attachments(Ted's bro's company) and WR Long!
Travis

Check em out here:
Tractor Tooth Bars at Everything Attachments

 

[SirMaxwell]

I'm sure we could easily sell them to manufacturers and have even been approached recently. BUT, selling to dealers would really go against a big part of our business model. Factory Direct. No Dealers, No Distributors, No Outside Sales Reps, No Printed, TV, Magazine, Billboard advertising.
The winner, who gets the best Quality and Value, is YOU GUYS!! :thumbsup:
Travis

View attachment 549781

Orange Paint? Check!

View attachment 549780

Dog gone it Travis, did you go and paint my Grapple Orange? You know this is on a Bobcat right?

Well, whats done is done, guess you can go ahead and ship it that way. I'll go watch out by the road for the truck.

 

[TooRow]

I see the tootth bars via third party from ETA. But they dont all protect the leading edge and I can find bucket loaders on your site for the same price as the tooth bar. I just thought the good folks over there might make a competitive priced bucket protection.

I do not foresee us making one in the near future, but we do have some great offerings by Construction Attachments(Ted's bro's company) and WR Long!
Travis

Check em out here:
Tractor Tooth Bars at Everything Attachments

 

[goeduck]

I'm sure we could easily sell them to manufacturers and have even been approached recently. BUT, selling to dealers would really go against a big part of our business model. Factory Direct. No Dealers, No Distributors, No Outside Sales Reps, No Printed, TV, Magazine, Billboard advertising.
The winner, who gets the best Quality and Value, is YOU GUYS!! :thumbsup:

Sounds good. By OEM I meant Original Equipment Manufacturer. ie sell to Kubota, Kioti, LS..... (not the dealer). They will eventually line up with grapple manufacturers and the aftermarket could taper off some. Might be a good idea to be the company they go with. Just sayin’

 

[MinnesotaEric]

After raking out 14" ruts in my driveway, cars can now passby and trucks won't high center.

 

[EverythingAttachments]

After raking out 14" ruts in my driveway, cars can now passby and trucks won't high center.

Wow! That Beastly Land Shark Landscape Rake looks to be offset around 3 1/2 feet. She'll reach out and touch something! :thumbsup:
Travis

 

[EverythingAttachments]

Sounds good. By OEM I meant Original Equipment Manufacturer. ie sell to Kubota, Kioti, LS..... (not the dealer). They will eventually line up with grapple manufacturers and the aftermarket could taper off some. Might be a good idea to be the company they go with. Just saying

Many of them already do have a line up with grapple manufacturers. You just don't hear much about them because they're not WICKED!!
Travis

 

[EverythingAttachments]

Dog gone it Travis, did you go and paint my Grapple Orange? You know this is on a Bobcat right?

Well, whats done is done, guess you can go ahead and ship it that way. I'll go watch out by the road for the truck.

The lucky guy who ordered the first Kubota Orange Wicked 60 grapple rake would probably have a huuuuuge issue with it, considering I even made a video showing we're in possession of his Wickedness and posted it to the Everything Attachments Channel Group! <<<click the link and you'll find it.
It would match your wheels, though! :laughing:
Travis

 

[greggyy]

I'm sure we could easily sell them to manufacturers and have even been approached recently. BUT, selling to dealers would really go against a big part of our business model. Factory Direct. No Dealers, No Distributors, No Outside Sales Reps, No Printed, TV, Magazine, Billboard advertising.
The winner, who gets the best Quality and Value, is YOU GUYS!! :thumbsup:
Travis

Well, you could always change that for outside the states, I would prefer US made than China any day.....but selling here would need to be through somebody, shipping 1 item would likely not work, unless there is shared containers.

 

[greggyy]

Thatç—´ the problem. US steel prices are already higher than the imported steel. Theyæ±*e not competitive at present pricing.

That is almost every countries problem, even when faced with the reality of poor steel, **** we dig it up, send it out & then buy back poor steel.

What will be interesting, is how other things will be effected, someone is going to pay somehow.

 

[BrokeFarmerJohn]

I searched a wearhouse and found something to take home...



Can’t wait to see it in the light!