Everything Attachments

EverythingAttachments · Dec 21, 2017

FTG-05 said:
- Is that an EA blade?

MtnViewRanch said:
Thanks darmstrong2319.

My blade is a Land Pride RBT45108. A (cat 2-3) 9' blade rated for a 15,000lb machine.

Yep, Brian's blade weighs north of 1,100 pounds and lists for over $5K.

It also takes a fairly heavy tractor to efficiently do work.

I don't see us ever going that heavy, but we do offer our Land Shark with hydraulic options and even give you the option of adding a landscape rake tine bar for swapping.
It's in the 800 pound range and very comparable to a Land Pride RBT35.
Travis

Land Shark 84" Scrape Blade
Land Shark 96" Scrape Blade

EverythingAttachments · Dec 21, 2017

Here's a little spur of the moment cell phone video I made to show off the Land Shark Landscape Rake with hydraulic options.
72" LS Rake
84" LS Rake
96" LS Rake

FTG-05 · Dec 21, 2017

EverythingAttachments said:
Yep, Brian's blade weighs north of 1,100 pounds and lists for over $5K. It also takes a fairly heavy tractor to efficiently do work.

I don't see us ever going that heavy, but we do offer our Land Shark with hydraulic options and even give you the option of adding a landscape rake tine bar for swapping.
It's in the 800 pound range and very comparable to a Land Pride RBT35.
Travis

Land Shark 84" Scrape Blade
Land Shark 96" Scrape Blade

Yea, you came out with that after I ordered my ED blade! (Video posted July 20; I recieved my ED blade on July 24 +/-. A day late and a dollar short. Which is appropriate since I couldn't afford the Land Shark anyway anyway....

Thanks Brian for posting the video. Getting the shoes worth it?

MtnViewRanch · Dec 21, 2017

FTG-05 said:
Yea, you came out with that after I ordered my ED blade! (Video posted July 20; I recieved my ED blade on July 24 +/-. A day late and a dollar short. Which is appropriate since I couldn't afford the Land Shark anyway anyway....

Thanks Brian for posting the video. Getting the shoes worth it?

Absolutely.:thumbsup: I hope to be ordering an 84" Land Shark next week, for use with my smaller tractor. :cool2: It will have skid shoes.

So get that red paint ready Travis.

darmstrong2319 · Dec 21, 2017

I wish I could afford it I would have one too! It would be perfect for me. I have a hinged back box blade from everything attachments and it’s very well built. I will buy from them again.

EverythingAttachments · Dec 22, 2017

MtnViewRanch said:
Absolutely.:thumbsup: I hope to be ordering an 84" Land Shark next week, for use with my smaller tractor. :cool2: It will have skid shoes.

So get that red paint ready Travis.

Great to hear, Brian! :thumbsup:
In the meantime, have a Merry Christmas!
Travis

FTG-05 · Dec 22, 2017

MtnViewRanch said:
Absolutely.:thumbsup: I hope to be ordering an 84" Land Shark next week, for use with my smaller tractor. :cool2: It will have skid shoes.

So get that red paint ready Travis.

So I guess I now know what I'll be getting myself for Christmas!!!

All you guys have a very Merry Christmas!!!!

MtnViewRanch · Dec 22, 2017

FTG-05 said:
WOW! The amount of material piled up after dropping the lift arms was impressive!

A couple of questions, if you don't mind:

- Is that an EA blade?
- Did you convert it to hydraulic action or did it come that way.
- It appears that with the lift arms in their first higher position, the blade didn't dig in; I assume that's due to the shoes - yes? The shoes were then essentially bypassed when the blade front was dropped.

If so, looks like EA owes you a sales commission.....

No, this is moving some material.

And yet even with that full blade, the material left to the side isn't all that much.

The last picture shows that a single cut can be made and feathered all at the same time.

K5lwq · Dec 25, 2017

Well Santa was sure good to me this year! He brought me a new valve with 3rd spool for my loader! It is installed and waiting on the new grapple that is on it's way from EA!

Before.