Everything Attachments

[EverythingAttachments]

I used our 36" Alternating depth model on my lawn last fall, and it worked AMAZING on Ted's 1250 Massey.
A 48" or 60" would have been faster, but the 36" ran in between the tires, so it was easy and efficient.
Here are some pics:
Travis



Nice Plugs:


There were a few bare spots that needed a few extra passes, so I gave those areas some forward/reverse treatment, which made a great seedbed. A hydrostatic or shuttle transmission makes that pretty easy.


It was picture perfect in no time!

 

[Mikejeakins]

What Grapple would you recommend for A Kubota mx5200?

 

[woody]

Was looking at your third function remote and just wanted to see if you thought it would work for me. I am using a (Sickle Bar) Sabre Samurai on my tractor which runs on a hydraulic motor. I have to run the tractor at low RPMs in order to keep the blades at the right speed. I also have a hydraulic post hole digger I will run from the front remotes and later I hope to get a grapple. I have a Kubota B26; there is a thread on here with pictures of my tractor and mower. Thanks for your advice.

 

[EverythingAttachments]

What Grapple would you recommend for A Kubota mx5200?

Our Dual Lid or Single Lid Wicked Grapple.
There's not an easy or proper answer because your tractor will handle any of the widths from the smallest 54" to the largest 72".
Personally, I like the 60" Single Lid or the 66" Dual Lid......but I also like all the others! :laughing:

If you give me a call, we can discuss your application and figure out which one is best.
Travis

 

[EverythingAttachments]

Was looking at your third function remote and just wanted to see if you thought it would work for me. I am using a (Sickle Bar) Sabre Samurai on my tractor which runs on a hydraulic motor. I have to run the tractor at low RPMs in order to keep the blades at the right speed. I also have a hydraulic post hole digger I will run from the front remotes and later I hope to get a grapple. I have a Kubota B26; there is a thread on here with pictures of my tractor and mower. Thanks for your advice.

What are you currently using to power the hydraulic PHD and the sickle?
There is a kit available for the B26.
The 3rd function hydraulic kit is really designed for momentary actuation, such as angling a snow plow and opening and closing a grapple or 4in1.
People do use them for PHDs and other attachments that require continuous flow, which is fine as long as you keep an eye on the fluid temperature.
Travis

 

[woody]

right now I connect into my valve that operates the thumb on the backhoe and prop the valve open, this works good but I don't like running all that hose and I want a cleaner and quicker connection. I also hang my PHD from the backhoe bucket and I want to change that and use it in the front of the tractor.

 

[EverythingAttachments]

right now I connect into my valve that operates the thumb on the backhoe and prop the valve open, this works good but I don't like running all that hose and I want a cleaner and quicker connection. I also hang my PHD from the backhoe bucket and I want to change that and use it in the front of the tractor.

It will work. You'll just need to keep an eye(or hand) on it to monitor the fluid temp. and take a break if it heats up due to continuous flow through the electrically actuated 3rd function valve.
Travis

 

[woody]

Travis thanks for responding, I looked at the TRA-3RD-FUNCL, is this the correct one? is it a WR Long? how many quick connects come with it? I did not see a parts list.

 

[EverythingAttachments]

Travis thanks for responding, I looked at the TRA-3RD-FUNCL, is this the correct one? is it a WR Long? how many quick connects come with it? I did not see a parts list.

That's the one. Yes, WR Long.
We order them with a pair of 1/2" ag couplers. You'll just need QDs on whatever you're hooking it to.
Travis

 

[woody]

I don't recall where I got my QDs from so to be sure I have the right ones how much for a set if I order the TRA-3RD-FUNCL.?