Engine leaking oil

[Karlibob]

I just purchased a TX25H this week. I’m happy with the performance but I have had a couple of issues. The first was the 3 point hitch would not operate. I contacted Summit and they were quick to help with a solution. The travel lock valve was frozen. I had to remove the cover plate who’s was removing the know, removing 2 bolts and 3 plastic push pins. I used a pair of pliers to rock the flexible line back and forth and it freed up and the 3 point dropped down and is now working. The rep thought that was the issue up front and turns out he was right. Second issue is that I have a drip under the engine and over the last 24 hours it has turned into a small puddle. Has anyone experienced this?

 

[Karlibob]

Typos above.
I had to remove the cover plate by removing the valve knob and then I removed the bolts and push pins.
I’m not sure why the above text happened the way it did.

 

[Amfab]

I thought I had an oil leak, and it was the dipstick rubber plug not sitting in the dipstick tube all the way. Oil splatters out after a little operation and gets on the bottom of the engine, and starts dripping. I would check that first.

-Andrew

 

[Karlibob]

I will check that, but I went out to start it today and the battery was dead. I tried jumping it but to no avail. This has happened twice now. Im taking the battery out and going to running's tomorrow. This is getting old. I will check the dip stick tomorrow.

Thanks Amfab

 

[Karlibob]

Found out yesterday that it's the pinion oil seal on the front. The dipstick would have been great.

 

[thclimer]

Welcome to TBN.

Hopefully your leak is covered under warranty (with it being this new it sure should be), what is your dealer telling you?

 

[Amfab]

oh, sorry it wasn't simple