I have a 14 foot with a 2 foot Vnose double axle Haulmark. Ramp door in the rear. It was just over what most economy value trailers cost. Tires could have been better and were worn after a few thousand miles. Had D rings in the floor standard. I ended up putting a 3/4" floor over the existing one for more strength. If I had to buy again today, I would buy a aluminum frame one with aluminum wheels and a siding that has no screws through it. .02
Enclosed trailers?
- Thread starter PapaPerk
- Start date
- Views: 9064
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 23,958
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
I do like the seamless siding... easy to keep clean in no rivets or screws...
AGRIMAN
Platinum Member
Here's my 2015 Eagle 8 x 28 manufactured by Freedom Trailers. I have only had it for a few months now, but so far I really like it. It's well built and pulls like a dream. It may be more than you are looking for, but they build smaller BP also.
HHR
Platinum Member
This is news to me. When I checked into them a few years back, I couldn't find anything.
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 23,958
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
Cargo Trailers | Trailer Manufacturer | Pace American Trailers
Just checked and still have a website...
I bought my used as the second owner and asked for new decals and they sent them gratis... I thought that was nice because they didn't have to do that.
Just checked and still have a website...
I bought my used as the second owner and asked for new decals and they sent them gratis... I thought that was nice because they didn't have to do that.
cat fever
Elite Member
Look for a Wells Cargo Silver Sport. Well built and will be the last trailer you ever buy. It's an all aluminum trailer. Problem is Wells Cargo does not make them any more so you would need to buy used. I was told they could not compete with the other low cost manufacturing plants. Good luck.
Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,883
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Here is the only one that I have had: Express Trailers for sale in Palmetto Florida near Tampa. Cargo Trailer Store
Found it on craigslist, bought it to move stuff to the new shop. Right after I got it set up to unload, the guy I bought it from called, said he would buy it back for what I paid him for it. I said sold!
Found it on craigslist, bought it to move stuff to the new shop. Right after I got it set up to unload, the guy I bought it from called, said he would buy it back for what I paid him for it. I said sold!
AGRIMAN
Platinum Member
If you have the extra time and don't mind the work, there are some good deals to be found on used trailers. As others have said, check it out good and know what you are buying. Here's a few pictures of an older trailer that's being rebuilt. We just shot the walls and roof with 1" of closed cell foam to add some much needed insulation.
Once the inside wall are installed, it will be ready for its new life.
Once the inside wall are installed, it will be ready for its new life.
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 23,958
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
Do you shoot the walls from cans or a commercial spray gun?