Elliptical tank cradle

[DXN1EL]

Hello

I recently bought a 400 gallon tank in excellent shape for 100 bucks.

I need some ideas. Can you guys post some pictures? Or ideas o how to build something like this.

 

[boomer1025]

You planing on mounting it on a stand or on a trailer ?? basically how are you going to use it will determine how you build the cradle.

 

[DXN1EL]

I will install it on a trailer

 

[DXN1EL]

When i made this one for a smaller 50 gallon but not sure if it will be ok so something this large

 

[DXN1EL]

....

 

[metalbender]

A frame with heavy belting accross would conform to the shape of the tank. Many years ago, our boat dolly utilized surplus fire hose for the slings, were still in use when the cottage sold thirty five years later. Wasn't left out in the sun for extended time though.

 

[mrmikey]

You may be better off buying a proper mount for it Norwesco :: Above Ground Tanks :: Elliptical Tanks .............Mike

 

[DXN1EL]

Mike, the cradle thingie cost about 700.

 

[mrmikey]

Mike, the cradle thingie cost about 700.

OK then, totally understood LOL..................Mike

 

[boomer1025]

Mike, the cradle thingie cost about 700.

Did you click on the part number for the 500 gal cradle and look at the blue print ??
Just remember, your tank when full of water will weigh over 3200 lbs, plus the weigh of the cradle.