Electrical wiring box

[armyof1]

ShibauraSP1540 tractor the electrical control box that goes to the tiller shorted out and blew the fuse. This some how stop the changing system and fuel system. It was fix by a friend of mine so I don't know all the detail at this time my question is can the box be unplugged or done away with? I use a toggle switch for the three point hitch. and I can get none of the button are switches to work don't read Japan so don't understand how it work anyway. I love to get the electric hydraulic control valve to work. It controls the hydraulic cylinder to the tiller it has 4 wires I put power to them all, it would not work it also has a small cylinder on top of the hydraulic cylinder it looks to be run by dc it only has wire going to it. Thanks to all who answered my question before.

 

[armyof1]

</font><font color="blue" class="small">( ShibauraSP1540 tractor the electrical control box that goes to the tiller shorted out and blew the fuse. This some how stop the changing system and fuel system. It was fix by a friend of mine so I don't know all the detail at this time my question is can the box be unplugged or done away with? I use a toggle switch for the three point hitch. and I can get none of the button are switches to work don't read Japan so don't understand how it work anyway.

I unpluged the box and the tractor still run that a plus. The seat cut into some of the wire and blowed the fuse so that is fixed.

I love to get the electric hydraulic control valve to work. It controls the hydraulic cylinder to the tiller it has 4 wires I put power to them all, it would not work it also has a small cylinder on top of the hydraulic cylinder it looks to be run by dc it only has wire going to it. Thanks to all who answered my question before. )</font>
The small cylinder was just a sensor to let the box know the location of the hydraulic cylinder . I removed it and got the wire to work it just needed to be grounded. there where 4 wires one black and red one black and blue one white and red one white and blue. Both red are for 12 volt hydraulic switch and the blue where for the ground. The cylinder works great thinking of using it for top and tilt. Sam /forums/images/graemlins/grin.gif