electrical problems on a 7265

[srob]

I have a 7265 Cub Cadet wich I bought used from someone who (hot wired) the glow plugs by using a toggle switch. Everything was working fine until I tried to put a rear work light on for removing snow. While tracking wires for the rear light I found a pigtail wire in place of the 60 AMP fuse. The plastic wire was starting to melt. I replaced the pigtail with the proper fuse but now the glow plugs are not working. The engine still turns over, but with the below freezing temps in the Northeast the tractor will not start. I bought a serice manual that does not have pictures of the engine and wires. Does anyone know where I can find color pictures of the ignition switch, alternator, and starter.

 

[MajMac392]

Hi there. I have a 7234 but haven't logged into this sight in a long time. Did you find the answer to your schematic question yet? Have you gone to the cubcadet.com site yet? They have some downloadable manuals there, both maintenance and operator. Go to: www.cubcadet.com and click on the Operator Manual link on the left side. If not that cut and paste the link below. Let me know how it turns out and feel free to send a question to my email.
PDF Manual Web Archive