EH72FI surging

[MossRoad]

I think JJ has a gas industrial engine in his. 4 or 6 cylinder but can't recall. One of those small straight 4 chevy engines might be nice.

 

[J_J]

My 1445 uses a small 4 cyl Ford industrial engine with radiator.

It takes up every inch of the 1445 tub space.

 

[MossRoad]

My 1445 uses a small 4 cyl Ford industrial engine with radiator.

It takes up every inch of the 1445 tub space.

Hey J_J, how does that motor drive the various pumps? My 425 has the tram pump directly coupled on one end of the crankshaft and the two section PTO/steering, lift, AUX PTO directly coupled to the other end of the crankshaft.

 

[J_J]

My PTO pump is piggybacked on the VSP pump/tram pump on work end.

Radiator and fan on the other end.

My steering and lift pump is powered by the fan belt.

Steering pump - 1.5 GPM

PTO pump = 13 GPM

Tram pump - estimate 7.5 GPM

Total = 22 GPM

 

[MossRoad]

How are your main PTO and VSP attached to the engine?

 

[J_J]

The VSP is bolted to the engine and the PTO pump is piggybacked on the VSP.

There has to be a splined receptacle for the splined pump.

This is my pump , bottom left.

http://www.eaton.com/ecm/groups/public/@pub/@eaton/@hyd/documents/content/pll_1474.pdf

Model 70160

 

[MossRoad]

Thanks. And Merry Christmas!!! :thumbsup: