Dump truck repair

[ticolawnllc]

A while back one of my workers damaged my rack body dump truck. Some of the racks were messed up good. I was hoping some one could help me find an online dealer that I could use to find new racks or parts to make my own.

 

[George2615]

You will probably need to know the manufacturer of the dump body. Should be a tag somewhere on the body. There are so many out there and the racks may be different for each company. Or take some exact measurements of the racks you need to replace and compare to other companies racks.

 

[ticolawnllc]

It's a reading rack dump body

 

[Arc weld]

Pics would help.

 

[Soundguy]

for sure.. post pics...

 

[ticolawnllc]

The truck had front end damage too. It's at the shop getting fixed up. I'll post pics when I get it back to the house

 

[ticolawnllc]

Let's see if this helps

 

[Junkyard Jim]

pretty standard stake body but here is a link: 406 Not Acceptable You will have to find the nearest dealer and all that, but it looks like they are available.

edit: not sure what the 406 not acceptable means, but google it and you'll find it.

 

[Soundguy]

I see some simple sheet metal damage ont he left upper rear tha tmight be some press and bend type repair.. same for the upright, or just toss in some rec-tube stock and tack in... looks like an afternoon after work and adult beverage sort of job?

 

[Big Barn]

I see some simple sheet metal damage ont he left upper rear tha tmight be some press and bend type repair.. same for the upright, or just toss in some rec-tube stock and tack in... looks like an afternoon after work and adult beverage sort of job?

I'm in.

Terry

 

[ticolawnllc]

The horizontal parts have some rust damage. Not a lot but I don't think they will bend back. Seeing that I'm going to take time to do this why not rebuild the back rack.

I don't want to buy a sheet metal break mostly

 

[ticolawnllc]

Trailer Parts Superstore® - Shopping Index
Has the individual parts made