dumb question about HST

   / dumb question about HST
  • Thread Starter
#91  
Another dumb question about HST:

How do you shift the range selector with no clutch?

Guessing that the answer is just stop and keep your feet off of the Go pedals?
 
   / dumb question about HST #92  
Another dumb question about HST:

How do you shift the range selector with no clutch?

Guessing that the answer is just stop and keep your feet off of the Go pedals?
yep, I put just the smallest amount of pressure on the shifter when almost stopped but not under a pulling load or when the engine is providing hold back.
 
   / dumb question about HST #93  
The manuals for my Kubota HST tractors say to throttle back, take your foot off the treddle and come to a near stop before changing gear ranges. I find it's sometimes easier if the tractor is moving slightly.

Gear changes are a lot less frequent with the HST plus transmission, since you can shift on the fly.
 
   / dumb question about HST #94  
Gear changes are a lot less frequent with the HST plus transmission, since you can shift on the fly.

I can shift on the fly with my gear drive too, up or down as the gears are synchronized.

SR
 
   / dumb question about HST
  • Thread Starter
#95  
The manuals for my Kubota HST tractors say to throttle back, take your foot off the treddle and come to a near stop before changing gear ranges. I find it's sometimes easier if the tractor is moving slightly.

Gear changes are a lot less frequent with the HST plus transmission, since you can shift on the fly.

I don't understand. Is it really "shift on the fly" if you have to "come to a near stop"?
 
   / dumb question about HST #96  
I don't understand. Is it really "shift on the fly" if you have to "come to a near stop"?

He is referring to the Hi-Lo in each of 3 ranges, which is shift on the fly. My Kubota HST+ transmission requires a complete stop to shift between the H/M/L ranges.
It's a great transmission, and can also auto shift the Hi-Lo based on load.
 
   / dumb question about HST #97  
I don't understand. Is it really "shift on the fly" if you have to "come to a near stop"?
You have to stop to change ranges. Helps if you let it roll very very slowly. Applies to either type of transmission, gear or HST.
 
   / dumb question about HST
  • Thread Starter
#98  
He is referring to the Hi-Lo in each of 3 ranges, which is shift on the fly. My Kubota HST+ transmission requires a complete stop to shift between the H/M/L ranges.
It's a great transmission, and can also auto shift the Hi-Lo based on load.

Now that you mention it, I do remember seeing something, somewhere, about a hi/lo within ranges. Sounds pretty nice.

Most of my reading/looking has been on Branson/TYM tractors. Guessing those do not offer this or I would have read more about it...?
 
Last edited:

Tractor & Equipment Auctions

UNUSED AGT MY50R EXCAVATOR (A51243)
UNUSED AGT MY50R...
2016 Toro Pro Force Towable Blower (A50324)
2016 Toro Pro...
2015 Mitsubishi Mirage Sedan (A50324)
2015 Mitsubishi...
Quick Attach Pallet Forks (A47384)
Quick Attach...
(30) 9' Pipe Fence Posts (A50515)
(30) 9' Pipe Fence...
Land Honor Quick Attach Land Plane (A50514)
Land Honor Quick...
 
Top