I can understand that first part, but my question about who uses it was still valid. Checking the parking brake is supposed to be part of our annual inspection yet I doubt it happens often... for the reason you cited.Advice from best auto mech instructors at MCC. "Don't operate a customer's e-brake unless testing it. If they don't use it regularly it's likely to stick somehow, leaving you to fix it for free if not part of the bid/job."
Test question I puzzled over: At a stop-light red's position is at: a) top, b) middle c) bottom. I got it wrong at least once.
Driver's License... What Vehicle did you use?
- Thread starter ultrarunner
- Start date
- Views: 22162
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,203
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
The newer RAM and Jeep vehicles can be set to apply the parking brake for you every time you place the transmission in park.
I have my 1500 and my wifes Compass set to do so, I've had very few issues when the parking brakes are used frequently.
As far as the traffic lights, left or top for red. Being slightly color deficient I have paid attention to that.
The worst part is yellow looking a lot like a street light to me.
I have my 1500 and my wifes Compass set to do so, I've had very few issues when the parking brakes are used frequently.
As far as the traffic lights, left or top for red. Being slightly color deficient I have paid attention to that.
The worst part is yellow looking a lot like a street light to me.
He always insisted he didn't! But, we all knew. lol.
the old grind
Elite Member
- Joined
- Jul 21, 2012
- Messages
- 4,412
- Location
- Mid-Michigan
- Tractor
- NH T-1520 HST, NH TC33DA HST, Case DX26 HST, .Terramite T5C, . NH L785
I failed a MA vehicle inspection in my TR4 back in '70. I was looking good (or thought so) until I was asked to check the parking brake. I applied it, shifted into Reverse, gave 'er some gas, and eased out the clutch. The car move ~2" before stalling. "Not good enough. Come back when you get that fixed." ... ??
Sigarms
Super Member
Cleaning out my home office work desk, found a photo album I sent some pics of to relatives. Just happen to open the last page...
My dad working on that truck that I failed with on the first try LOL
My dad working on that truck that I failed with on the first try LOL
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,924
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Nice! Sitting in the engine compartment.... back when there wasn't a bunch of extra "stuff" in there.
the old grind
Elite Member
- Joined
- Jul 21, 2012
- Messages
- 4,412
- Location
- Mid-Michigan
- Tractor
- NH T-1520 HST, NH TC33DA HST, Case DX26 HST, .Terramite T5C, . NH L785
My first truck was a '67 Dodge slant six with creeper four-speed on the floor and no synchro on 1st gear. I could have taken a nap under the hood with it closed. The bed had been cut through by a PO and a large ring was anchored to the frame ... to tie down a hog going to the butcher.
two_bit_score
Super Star Member
- Joined
- Dec 22, 2008
- Messages
- 10,983
- Tractor
- John Deere 110 TLB, Diamond C 19LPX GN trailer
1966 Chevrolet C10 step side
Sigarms
Super Member
Open a new car hood up now, it's generally packed.
I think I took that pic when I was about 15.
Cars are no different than HVAC equipment. The government keeps making new requirements for the manufacturers to meet that requires extra parts