Drawbar for l3400

[novasbc]

I find that my l3400 doesnt have a drawbar, or the necessay attachment points.

Do I need to get all the parts listed in the diagram to add one?



Mark

 

[kneedeep]

Yes, will need the bracket to use any drawbar unless this is used instead-

CountyLine Cross Drawbar, Category 1, 3/4 in. dia. - For Life Out Here

 

[novasbc]

Yes, will need the bracket to use any drawbar unless this is used instead-

CountyLine Cross Drawbar, Category 1, 3/4 in. dia. - For Life Out Here

Thanks, I already have a 3ph draw bar, but have now read many threads scaring me away from using it. I wanted to do it "right".

I'll order the full set of brackets, thanks!

Mark

 

[kneedeep]

That particular Drawbar is not a heavy duty model, but real good ones are available that cost much more from Ag supply companys.

I have a good one that I 'made' a 2 point hitch for a IH 5100 Grain Drill since the original hitch is not a good design and was worn making it a sloppy connection with a lot of slack. Using the tractor factory drawbar did not level the drill and was wearing the hitch even more. I only use the tractor drawbar for a anchor point and tiedown for transport.
I like the 2 PT hitch for the ability to adjust any towed implement on the go and hooking up as a breeze compared to the drawbar connection (PATS on tractor lift arms)

JMHO

Rod

Drilling Wheat Cover Crop - YouTube