Price Check Downsizing - need to sell my YM2400

   / Downsizing - need to sell my YM2400 #1  

lewjay

New member
Joined
Oct 23, 2012
Messages
9
Location
WarmSprings, GA
Tractor
Yanmar YM2000
Trying to get an idea of what to ask for my YM2400 with 5 ft Bushog. It has 175 hours on the meter and it only had 4 when I got it. Had the fuel pump rebuilt recently but that is all I have ever had to do besides change the oil.
I'm in West Georgia area.
 
   / Downsizing - need to sell my YM2400 #2  
Trying to get an idea of what to ask for my YM2400 with 5 ft Bushog

There isn't a YM2400. Maybe a YM2420, or YM2500, or YM240D? Is it 2wd or 4wd? Does it have a loader on it?
 
   / Downsizing - need to sell my YM2400 #3  
There isn't a YM2400. Maybe a YM2420, or YM2500, or YM240D? Is it 2wd or 4wd? Does it have a loader on it?

someone has rolled that meter back, installed a new meter, or the meter has rolled over
 
   / Downsizing - need to sell my YM2400 #4  
Profile says Ym2000. My guess just a typo. Typical for me with all my arm and hand injury's. If it's not on there look on ATL. CL. Farm and Garden and you can get a good idea what to ask. You can tell from Ridiculous to a good asking price. Remember and most know this go high on your price. Easy to lower it but hard to go up. If you want to sell it..
 
   / Downsizing - need to sell my YM2400 #5  
it has a rolled hour meter or its a recon with a rolled meter. No way you bought a 30 year old tractor with 4 hours on it. No way an almost 40 year old tractor only has 175 hours, maybe 1,175 or 2,175? Also i guess you mean injector pump? Like others there is no 2400 but we will assume like Carey said a typo. We need to know if it has a loader, that can bump you up a thousand or more dollars easy. From your model number there is no D so i assume its not 4wd unless that was accidentally left off? Drop back in and give some more info and a pic and i bet we can price you within $500 of where you need to be easily.
 
   / Downsizing - need to sell my YM2400
  • Thread Starter
#6  
Yep typo. It is a YM2000. It was a grey market that I bought in Atlanta from a dealer. No accys on it. I bought a 5ft Bush Hog for it and yes it was the injector pump. Only has 2whd . Let me see if I can add the picture. 574511_4024121954114_873783737_n[1].jpg
 
   / Downsizing - need to sell my YM2400 #7  
Is it from Spalding?

Do you still have that Spring tooth harrow? Want to sell it?

As for the tractor value with the bush hog? I would say $3000-3500 max? Help me out Carey, that's your back yard. Keep in mind you can buy a Fredericks refurb with a warranty for just of $4000 right now and then a bushhog on top of that .
 
   / Downsizing - need to sell my YM2400 #8  
4 is about right IMO.. I gave 2800.00 for mine 11Yrs. ago. Used ASIS. And I like the Yanmar Decal it has the same one that I do. I don't see that often. The one's I had in my shed Clemsonfor that I took off. I wouldn't take anything less! But that is Tractor and BH.. When I say 4 that's would be the lowest so ask 4.800$. Just a tractor at Fred. is 5. Had a YM2500 steve cut us a deal on. And when I say A deal the tractor New Referb. wasn't a whole lot more. So that's up there. But then again who it was for was a big factor also. Property of retired Catholic Priests they just moved to LOL...... So keep that in mind also.
 
   / Downsizing - need to sell my YM2400 #9  
That is a nice looking tractor, and I agree with Clemsonfor and Carey on the price, since it is 2wd
 
   / Downsizing - need to sell my YM2400 #10  
your right a YM2000 is now up to $4,999. I still think though $4000 may be tops, and that's with the BH.
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2003 Chevrolet 3500 (A50120)
2003 Chevrolet...
2015 Chevrolet Silverado 1500 Ext. Cab Pickup Truck (A50323)
2015 Chevrolet...
(8) 2 PLUG VALVES (A52472)
(8) 2 PLUG VALVES...
48" Pallet Forks  (A52384)
48" Pallet Forks...
2025 Kivel 48in Forks and Frame Skid Steer Attachment (A50322)
2025 Kivel 48in...
 
Top