digging trench

   / digging trench #1  

jnoe

New member
Joined
Sep 14, 2012
Messages
3
Hi I've got a 2450 I've cleaned out creeks built a road and cut banks back now l am going to run about 500 ft of water line in a strait line and the ground is level can I use the trans bypass and pull or push the tractor while digging without doing any damage to trans any advice would be appreciated this is my first hydrostatic drive tractor. Thanks.
 
   / digging trench #2  
Do you have the manual for your 2450?
I have the same tractor so I looked at my manual and is says:
"Do not operate the Hydro Static Transmission pressure release lever while the engine is running"
So I would say no.
 
   / digging trench
  • Thread Starter
#3  
Thanks I've read the manual on it also
 
   / digging trench #4  
Ihave often wondered how you pushed around a hydro witha backhoe . I would get a stick long enough to hit the go pedal .
 

Tractor & Equipment Auctions

1994 Mack CH613 T/A Wet Kit Day Cab Truck Tractor (A49461)
1994 Mack CH613...
UNUSED JCT QUICK ATTACH 84" ROCK GRAPPLE BUCKET (A51244)
UNUSED JCT QUICK...
2018 CATERPILLAR 336FL EXCAVATOR (A51242)
2018 CATERPILLAR...
PLEASE VIEW ALL PICTURES!! (A50774)
PLEASE VIEW ALL...
2018 INTERNATIONAL 4400 SBA 4X2 SERVICE TRUCK (A51406)
2018 INTERNATIONAL...
2004 JOHN DEERE 5320 TRACTOR (A51243)
2004 JOHN DEERE...
 
Top