digging trench

/ digging trench #1  

jnoe

New member
Joined
Sep 14, 2012
Messages
3
Hi I've got a 2450 I've cleaned out creeks built a road and cut banks back now l am going to run about 500 ft of water line in a strait line and the ground is level can I use the trans bypass and pull or push the tractor while digging without doing any damage to trans any advice would be appreciated this is my first hydrostatic drive tractor. Thanks.
 
/ digging trench #2  
Do you have the manual for your 2450?
I have the same tractor so I looked at my manual and is says:
"Do not operate the Hydro Static Transmission pressure release lever while the engine is running"
So I would say no.
 
/ digging trench
  • Thread Starter
#3  
Thanks I've read the manual on it also
 
/ digging trench #4  
Ihave often wondered how you pushed around a hydro witha backhoe . I would get a stick long enough to hit the go pedal .
 

Marketplace Items

UNUSED FUTURE PG72-72" HYD PLATE GRABBER (A62130)
UNUSED FUTURE...
2014 CATERPILLAR 573C FELLER BUNCHER (A62129)
2014 CATERPILLAR...
SKIDDED FRAC TANK (A58214)
SKIDDED FRAC TANK...
2007 Toyota Avalon Sedan (A61569)
2007 Toyota Avalon...
2000 Freightliner FL112 T/A Dump Truck (A61568)
2000 Freightliner...
1987 GMC C7000 Fire Truck, VIN # 1GDM7D1G3HV526472 (A61165)
1987 GMC C7000...
 
Top