digging trench

   / digging trench #1  

jnoe

New member
Joined
Sep 14, 2012
Messages
3
Hi I've got a 2450 I've cleaned out creeks built a road and cut banks back now l am going to run about 500 ft of water line in a strait line and the ground is level can I use the trans bypass and pull or push the tractor while digging without doing any damage to trans any advice would be appreciated this is my first hydrostatic drive tractor. Thanks.
 
   / digging trench #2  
Do you have the manual for your 2450?
I have the same tractor so I looked at my manual and is says:
"Do not operate the Hydro Static Transmission pressure release lever while the engine is running"
So I would say no.
 
   / digging trench
  • Thread Starter
#3  
Thanks I've read the manual on it also
 
   / digging trench #4  
Ihave often wondered how you pushed around a hydro witha backhoe . I would get a stick long enough to hit the go pedal .
 

Tractor & Equipment Auctions

2016 Toyota Prius Hatchback (A50324)
2016 Toyota Prius...
2017 Ford F-450 Crew Cab Mason Dump Truck (A50323)
2017 Ford F-450...
IH 445 Square Baler (A50515)
IH 445 Square...
2016 CATERPILLAR 336FL EXCAVATOR (A51242)
2016 CATERPILLAR...
UNUSED AGT MX15RX EXCAVATOR (A51243)
UNUSED AGT MX15RX...
2001 GREAT DANE 53' CONTAINER TRAILER (A51243)
2001 GREAT DANE...
 
Top