Did I get the wrong moly grease for my backhoe/loader pins?

   / Did I get the wrong moly grease for my backhoe/loader pins? #1  

XR4140

Bronze Member
Joined
Aug 24, 2018
Messages
56
Location
MO
Tractor
18 LS XR4140
Did I get the wrong moly grease for my backhoe/loader pins?

Grabbed this moly grease, when I got home realized it says lithium. Its dark like im used to. Says NLGI-LB on the back.

Thanks for the help!

 
   / Did I get the wrong moly grease for my backhoe/loader pins? #2  
Somebody help me out here: Where's the downside here?
 
   / Did I get the wrong moly grease for my backhoe/loader pins? #3  
First of all, any grease is light years ahead of no grease. Looks fine to me, remember you are not lubricating high speed bearings here. Lube away.
 
   / Did I get the wrong moly grease for my backhoe/loader pins? #4  
Use it, you will be good. Pay attention to how long it stays in the joint.

I found Wal-Mart SuperTech Marine Grease lasts the longest in my Cat backhoe.

I tried a sporty looking Red synthetic but it ran out of the joints from the heat in the summer.
 
   / Did I get the wrong moly grease for my backhoe/loader pins? #5  
First of all, any grease is light years ahead of no grease. Looks fine to me, remember you are not lubricating high speed bearings here. Lube away.

^^^^^ What he said!
 
   / Did I get the wrong moly grease for my backhoe/loader pins?
  • Thread Starter
#6  
Thanks guys. Guess ive never seen moly lithium grease. Im used to the white lithium stuff.

Noob here learning.

Carry on :)
 
   / Did I get the wrong moly grease for my backhoe/loader pins? #7  
I think most of it is lithium base. Look at the moly content. I switched to a 5% moly for my backhoe and it lasts much longer than what I had been using.
 
   / Did I get the wrong moly grease for my backhoe/loader pins? #8  
From a reliable source I read you should not always be switching back and forth from lithium based grease to other based grease. Stick with the same base. Switching once in a blue moon doesn't hurt. As long as that tube says high pressure I would use it and then stick to a lithium based grease.
 
   / Did I get the wrong moly grease for my backhoe/loader pins? #10  
On loaders and backhoes pins I switched to Deere polyurea grease. It's their "best" in a lineup of lithium, lith-moly and then polyurea. Kubota also sells a branded polyurea now and I believe dropped the basic lithium from their line.

The Deere poly is a thicker grease that makes loaders, buckets, pins etc feel as tight as new and it stays there for a while.
 

Tractor & Equipment Auctions

2008 CATERPILLAR 430E BACKHOE (A51242)
2008 CATERPILLAR...
2020 VOLVO VNL760 SLEEPER (A51222)
2020 VOLVO VNL760...
2008 INTERNATIONAL DURASTAR 4300M7 SBA 4X2 DUMP TR (A51243)
2008 INTERNATIONAL...
AGT Agrotk 680 Drop Hammer Attachment (A47384)
AGT Agrotk 680...
Danuser Digger F-8 (A52128)
Danuser Digger F-8...
Toro Zero Turn (A50324)
Toro Zero Turn...
 
Top