Deutz DX140

[S Harrison]

Mornin!
Just picked up a Deutz DX140 to use as a power plant on a grain vac. After purchase found there was an issue with the brakes. We are thinking it is a cracked master cylinder. Any advice?
Thanks! Have a good one!

 

[brad123]

Need some more specifics... A seal kit can also be bought... Where is it leaking out... The seals are usually what is gone in them and then you need
to possibly bleed out air in line.. If it is just seals replace them at cost of about 60 bucks and refill holding container and then pump brakes until lines are full or you may need to bleed lines... There are a couples brake lines under the cab passenger side that this can be done at.. hope this helps