Deere 210 Idler pully problem

[wolfden793]

Hello,

I'm new to the site and need some assistance with a problem with my John Deere 210 (early serial) that I have been restoring from the ground up and when I start the engine, the transmission idler pulley won't turn when bolt is tight and the belt (new) starts to smoke. If not tightened, it rattles, but doesn't smoke. I'm guessing a tension issue or adjustment? If you remove the pulley, it spins fine. Any help would be appreciated!

 

[tomplum]

Welcome to the TBN. Is it possible that the offset is flipped the wrong way and the pulley is drawn into the bracket or?

 

[wolfden793]

Hi Tom,

Thanks for the welcome. I did consider this, but when I took it apart to restore, I took alot of pictures, but neglected to take one of the pulley to see which side the offset it on. Deere parts book and service manuals I have don't give a clear pic from an angle that would tell me. If you or anyone knows, that may solve the problem. Thanks again for your time!

Jim