CX2510 top lengths?

   / CX2510 top lengths? #2  
I can get you the closed measurements tomorrow. I'm looking to do the same but will order it from Fit Right Hydraulics. @MtnViewRanch
 
   / CX2510 top lengths? #3  
Closed, center eye to center eye it's right at 19 inches.

What I would consider fully open (pic) is 29 inches.

PXL_20210512_190011259.jpg
 
   / CX2510 top lengths? #4  
Based on the info supplied, I would say either a 19 1/2"- 27 1/2" or a 20"-29".

It is actually better to get the asked for dimension of the following link and base the best possible working length off of that dimension.

 
   / CX2510 top lengths? #6  
Based on the info supplied, I would say either a 19 1/2"- 27 1/2" or a 20"-29".

It is actually better to get the asked for dimension of the following link and base the best possible working length off of that dimension.


"The best way to do this is to have your tractor hitched up to your box blade (as an example) have the implement level with the ground front-back and side-side. Have the implement on the ground, measure the pin-pin distance."

So would this distance ideally fall right in the middle of the closed/open spread?
 
   / CX2510 top lengths? #7  
Typically for tractors with a 7" stroke or less, centered generally works the best. For 8" and longer strokes, 1/4"- 1/2" more retraction than extension seems to work well.
 
   / CX2510 top lengths? #8  
I should be getting my CX2510 next week. Did you pick a top link and hoses? If so, do you mind sharing what you go? Thanks!
 

Tractor & Equipment Auctions

2014 John Deere 544K 2 Wheel Loader (A47384)
2014 John Deere...
2009 HINO 185 18FT BOX TRUCK (A51219)
2009 HINO 185 18FT...
2017 Caterpillar 326FL Hydraulic Excavator (A50322)
2017 Caterpillar...
2014 CHEVROLET SILVERADO (A50854)
2014 CHEVROLET...
2015 JEEP PATRIOT (A51406)
2015 JEEP PATRIOT...
12in Backhoe Bucket (A52128)
12in Backhoe...
 
Top