BloomingtonMike
Platinum Member
- Joined
- Jun 30, 2004
- Messages
- 788
- Tractor
- John Deere 3320
I had this $75 Carry all from Tractor Supply made by King Kutter. Very neat design but of course it did not work with IMatch. My friend Larry on TBN recommended that I take some steel and make new ears for the lift pins to mount too and weld them up about 3/4" from the original pins. I finally got around to doing it and it worked beautifully. Now my welds are definately that of a beginner but with 5/16" steel and four welds even I can get it to come out very strong. I welded it up today and mounted the pins. Works perectly with IMatch now!!
In fact I used it to haul my 25 gallon TSC sprayer around the yard (the sprayer as configures was a pull behind on a small cart). I mounted it horizontally across the arms of the carry all and just used the spray gun. Earlier last week I wired in a 12V cigarete lighter receptical onto the tractor. I wired up a quick connect cig plug to the sprayer and plugged it in. I then mixed up the Roundup and water and drove around and sprayed weeds for an hour or two. New mobile mount and boom will be made for the sprayer to use with the carry all.
Pics to be added shortly.
In fact I used it to haul my 25 gallon TSC sprayer around the yard (the sprayer as configures was a pull behind on a small cart). I mounted it horizontally across the arms of the carry all and just used the spray gun. Earlier last week I wired in a 12V cigarete lighter receptical onto the tractor. I wired up a quick connect cig plug to the sprayer and plugged it in. I then mixed up the Roundup and water and drove around and sprayed weeds for an hour or two. New mobile mount and boom will be made for the sprayer to use with the carry all.
Pics to be added shortly.