clutch questions..

   / clutch questions.. #1  

psuedofarmer

Gold Member
Joined
Jun 1, 2004
Messages
325
Location
new hampshire
Tractor
Kioti DK55 Cab, 3 NHs (from 40-90HP)
this goes along the lines of a stupid question (although i know there are really no stupid ones!):

just when does the clutch have to be engaged?

i know that it has to be engaged when changing gears, what about forward/reverse, changing from Low/Med/High and going from 2 to 4 wheel drive?

i believe i know the answer to this - but perhaps someone can put my mind at ease..

pf
DK55c
 
   / clutch questions.. #2  
I believe the manual calls for using the clutch to do all of those. Of course, you have a different tractor than I, but my manual says to use the clutch for 2/4WD changes, but if you're sitting still, and you should be, it will change without the clutch in, as will the range selector on mine. F/R shuttle requires the clutch on that model, but you don't have to come to a complete stop. John
 
   / clutch questions..
  • Thread Starter
#3  
thanks - i read the manual in the wee-hours of the morning - and i now recall it does say exactly what you described.

pf
 
   / clutch questions.. #4  
How about disengaged instead of engaged? /forums/images/graemlins/wink.gif /forums/images/graemlins/laugh.gif
 
   / clutch questions.. #5  
</font><font color="blue" class="small">( How about disengaged instead of engaged? )</font>
you're sooo right Bird. /forums/images/graemlins/grin.gif John
 
   / clutch questions.. #6  
I use it for everyhting just because. When changing ranges or 2-4wd. stop and use the loader to raise the front wheels off the ground . This allows for real easy transitions. You do not have to be at a full stop for the forward - reverse changes .Did my first fuel cannister change on my DK 55 today and it runs real smooth. Funny how things get a bit funky without notice.
 
   / clutch questions.. #7  
one of the most important things to remember about the clutch on any machine is ,---- GET YOUR FOOT OFF THE PEDAL when you are NOT actually using it.
The pedal makes for a comfortable foot rest. That ain't what its for.
Do not "feather" the clutch when digging. Choose a lower gear and GET YOUR FOOT OF THE PEDAL.
Proper use of the clutch will result in many thousands of hours of use. Improper use will result in just a few hours of use and many $$$$ in replacement.
Have fun and be careful virgil
 

Tractor & Equipment Auctions

Yale 50LX Cushion Tire Forklift (A49461)
Yale 50LX Cushion...
John Deere Bale Spear (A50515)
John Deere Bale...
2017 Ford F-250 Knapheide Enclosed Service Truck (A50323)
2017 Ford F-250...
Hesston 565T Round Baler (A50514)
Hesston 565T Round...
Brent 420 Grain Cart (A50514)
Brent 420 Grain...
2016 FORD F-150XL SINGLE CAB TRUCK (A51406)
2016 FORD F-150XL...
 
Top